Applied Mathematics and Modeling for Chemical Engineers (3 volums set), Richard G. Rice, Duong D. Do, James E. Maneval
Автор: Saichev Название: Distributions in the Physical and Engineering Sciences, Volume 1 ISBN: 3319979574 ISBN-13(EAN): 9783319979571 Издательство: Springer Рейтинг: Цена: 46570.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Distributions in the Physical and Engineering Sciences is a comprehensive exposition on analytic methods for solving science and engineering problems which is written from the unifying viewpoint of distribution theory and enriched with many modern topics which are important to practitioners and researchers.
Автор: Tom Proulx Название: Optical Measurements, Modeling, and Metrology, Volume 5 ISBN: 1461429056 ISBN-13(EAN): 9781461429050 Издательство: Springer Рейтинг: Цена: 243800.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Optical Measurements, Modeling, and Metrology represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011.
Автор: Maria-Carme T. Calderer; Eugene M. Terentjev Название: Modeling of Soft Matter ISBN: 1489987584 ISBN-13(EAN): 9781489987587 Издательство: Springer Рейтинг: Цена: 121110.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Arnold, Director of the IMA Arnd Scheel, Deputy Director of the IMA PREFACE The physics of soft matter in particular, focusing on such materials as complex fluids, liquid crystals, elastomers, soft ferroelectrics, foams, gels and particulate systems is an area of intense interest and contemporary study.
Автор: Martin Golubitsky; Dan Luss; Steven H. Strogatz Название: Pattern Formation in Continuous and Coupled Systems ISBN: 0387988742 ISBN-13(EAN): 9780387988740 Издательство: Springer Рейтинг: Цена: 139750.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This IMA Volume in Mathematics and its Applications PATTERN FORMATION IN CONTINUOUS AND COUPLED SYSTEMS is based on the proceedings of a workshop with the same title, but goes be yond the proceedings by presenting a series of mini-review articles that sur vey, and provide an introduction to, interesting problems in the field.
Автор: Philippe G. Ciarlet Название: Mathematical Elasticity, Three Volume Set ISBN: 1611976936 ISBN-13(EAN): 9781611976939 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 200640.00 T Наличие на складе: Поставка под заказ. Описание: The Mathematical Elasticity set contains three self-contained volumes that together provide the only modern treatise on elasticity. They introduce contemporary research on three-dimensional elasticity, the theory of plates, and the theory of shells. Each volume contains proofs, detailed surveys of all mathematical prerequisites, and many problems for teaching and self-study. An extended preface and extensive bibliography have been added to each volume to highlight the progress that has been made since the original publication.The first book, Three-Dimensional Elasticity, covers the modeling and mathematical analysis of nonlinear three-dimensional elasticity. In volume two, Theory of Plates, asymptotic methods provide a rigorous mathematical justification of the classical two-dimensional linear plate and shallow shell theories. The objective of Theory of Shells, the final volume, is to show how asymptotic methods provide a rigorous mathematical justification of the classical two-dimensional linear shell theories: membrane, generalized membrane, and flexural.These classic textbooks are for advanced undergraduates, first-year graduate students, and researchers in pure or applied mathematics or continuum mechanics. They are appropriate for courses in mathematical elasticity, theory of plates and shells, continuum mechanics, computational mechanics, and applied mathematics in general.
Автор: Randall J. LeVeque Название: Finite Volume Methods for Hyperbolic Problems ISBN: 0521009243 ISBN-13(EAN): 9780521009249 Издательство: Cambridge Academ Рейтинг: Цена: 77090.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book, first published in 2002, contains an introduction to hyperbolic partial differential equations and a powerful class of numerical methods for approximating their solution, including both linear problems and nonlinear conservation laws. This provides an excellent learning environment for understanding wave propagation phenomena and finite volume methods.
Автор: Luis Manuel Braga da Costa Campos Название: Ordinary Differential Equations with Applications to Trajectories and Vibrations, Six-Volume Set ISBN: 0367137178 ISBN-13(EAN): 9780367137175 Издательство: Taylor&Francis Рейтинг: Цена: 484880.00 T Наличие на складе: Невозможна поставка. Описание: This six-volume set covers linear differential equations (diff eq) and oscillators, nonlinear diff eq and dynamical systems, higher- order diff eq and elasticity, simultaneous systems of diff eq and multidimensional oscillators, singular diff eq and special functions,and classification and examples of diff eq and their applications.
Автор: Ioannis K. Argyros Название: Mathematical Modeling for the Solution of Equations and Systems of Equations with Applications. Volume IV ISBN: 1536174742 ISBN-13(EAN): 9781536174748 Издательство: Nova Science Рейтинг: Цена: 276660.00 T Наличие на складе: Невозможна поставка. Описание: Biomass gasification has received tremendous research attention all over the world because (a) biomass is abundant, diverse, renewable, and environmentally friendly, (b) the produced biogas/syngas is clean, versatile, efficient, and easily controllable, and (c) the system used is generally simple. This book aims to present up-to-date research on biomass gasification. The content of this book is divided to three parts or sections: the fundamentals of biomass gasification as presented in chapters 1 to 4, experimenting of biomass gasification as presented in chapters 5 and 6, and simulation of biomass gasification as presented in chapters 7 to 8. In chapter 1 (An introduction to biomass), biomass is introduced, and these mainly include biomass resources, biomass and energy, biomass and environment, benefits of biomass, etc. In chapter 2 (Biomass properties), the properties of biomass are introduced, and these include structural compositions (cellulose, hemicellulose, lignin, starch, extractives, proteins, etc.), physical properties (moisture content, particle size, bulk density, porosity, etc.), chemical properties (elemental compositions, chemical compositions, heating value, etc.) and the other properties (thermal conductivity, ignition temperature, specific heat, etc.). In chapter 3 (Biomass gasification technologies), biomass gasification technologies are classified and introduced according to the gasification agents used (air, oxygen, steam, hydrogen, supercritical water, carbon dioxide and the combination of the above gases), and some factors that have significant impacts on gasification technologies (or performances) are also discussed. Then the emerging gasification technologies (microwave gasification, solar gasification and plasma gasification) using new heat sources are also detailed, and the effects of heat source on biomass gasification are also discussed. In chapter 4 (Biomass gasifiers), the main gasifier structures are introduced, and these include fixed bed gasifiers (updraft and downdraft), fluidized bed gasifiers (bubbling fluidized bed, circulating fluidized bed and dual fluidized bed), entrained flow gasifiers (Koppers-Totzek (K-T) gasifier, shell gasifier and Gas Schwarze Pumpe (GSP) gasifier and Colin gasifier). The other gasifier structures are also presented, and these include solar gasifier, microwave gasifier and plasma gasifier, etc. In chapter 5 (High-temperature gasification of biomass), the effects of physical and chemical properties of biomass on high-temperature gasification are analyzed, and these mainly include high-temperature pyrolysis of biomass, thermal cracking of biomass tar, and high-temperature gasification of biomass char. In chapter 6 (Supercritical water gasification of biomass), the properties of SCW (supercritical water) are detailed and the effects of different operating parameters on CE (carbon conversion efficiency) and GE (gasification efficiency) are summarized. The operating parameters include feedstock characteristics, biomass concentration, gasification temperature, reactor pressure, residence time and catalyst types and concentration. In chapter 7 (Simulation of biomass gasification using thermodynamic equilibrium model), the two thermodynamic equilibrium models of stoichiometric thermodynamic equilibrium models and non-stoichiometric equilibrium models (using Gibbs free energy minimization approach) are initially introduced, and the simulation results obtained from biomass gasification using thermodynamic equilibrium models based on Aspen Plus are then presented. In chapter 8 (Simulation of biomass gasification using intrinsic reaction rate submodel), the numerical simulation of biomass gasification using the intrinsic reaction rate submodel was introduced. The kinetic model for char-gas reaction as well as the intrinsic kinetic data for various biomass materials are detailed. A CFD (computational fluid dynamic) model based on the intrinsic kinetics is developed for biomass entrained flow gasification, and the effects of operating conditions including gasification temperature, equivalence ratio, CO2/biomass mass ratio and average particle size on the gasification performances in a lab-scale entrained flow reactor are investigated. Multi-objective optimization of biomass gasification based on response surface method is then studied to improve the gasification performances. Hopefully, the content of this book can supply a helpful guide to the up-to-date research on the fundamentals, experimental, and simulation of biomass gasification.
The book will benefit a reader with a background in physical sciences and applied mathematics interested in the mathematical models of genetic evolution. In the first chapter, we analyze several thought experiments based on a basic model of stochastic evolution of a single genomic site in the presence of the factors of random mutation, directional natural selection, and random genetic drift. In the second chapter, we present a more advanced theory for a large number of linked loci. In the third chapter, we include the effect of genetic recombination into account and find out the advantage of sexual reproduction for adaptation. These models are useful for the evolution of a broad range of asexual and sexual populations, including virus evolution in a host and a host population.
Автор: Freed, Daniel S. Название: Selected works of isadore singer: 3-volume set ISBN: 1571464042 ISBN-13(EAN): 9781571464040 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 133980.00 T Наличие на складе: Поставка под заказ. Описание: Presents the major mathematical works of Isadore Singer, selected by Singer himself, and organised thematically into three volumes. Each volume begins with a commentary (and in the first volume, a short biography of Singer), and then presents the works on its theme in roughly chronological order.
Автор: C. S. Mujawar Название: Engineering Mathematics: Volume I ISBN: 9380578636 ISBN-13(EAN): 9789380578637 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 31410.00 T Наличие на складе: Невозможна поставка. Описание: A comprehensive classroom text for the first year engineering students. The topics included are differential calculus with partial differentiations, integral calculus, vector calculus and linear algebra including transformations.
Автор: G. Shanker Rao Название: Engineering Mathematics: Volume II ISBN: 8190656600 ISBN-13(EAN): 9788190656603 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 24950.00 T Наличие на складе: Невозможна поставка. Описание: A comprehensive text for the students of engineering. The topics included are differential equations, special functions, laplace transforms, partial differential equations and applications of partial differential equations. Key features: each topic is treated in a systematic and logical manner; includes a variety of exercises; includes worked out examples from examination papers.
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
