Numerical Modelling of Discrete Materials in Geotechnical Engineering, Civil Engineering and Earth Sciences, Konietzky, Heinz
Автор: Annamaria Cividini Название: Application of Numerical Methods to Geotechnical Problems ISBN: 321183141X ISBN-13(EAN): 9783211831410 Издательство: Springer Рейтинг: Цена: 172350.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: The NUMGE Conference, held in Udine, Italy in 1998, brought together researchers, scientists and practicing engineers from European and overseas countries, to share their knowledge and experience on the various aspects of the analysis of geotechnical problems through numerical methods.
Автор: Burczynski Название: Multiscale Modelling and Optimization of Materials and Structures ISBN: 1119975921 ISBN-13(EAN): 9781119975922 Издательство: Wiley Рейтинг: Цена: 119270.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Addresses the topical, crucial and original subject of parameter identification and optimization within multiscale modeling methods. This book presents an area of research that enables the design of materials and structures with better quality, strength and performance parameters. It describes micro and nano scale models along with case studies.
Автор: Hany Shehata; Chandrakant S. Desai Название: Advances in Numerical Methods in Geotechnical Engineering ISBN: 303001925X ISBN-13(EAN): 9783030019259 Издательство: Springer Рейтинг: Цена: 130430.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This volume deals with numerical simulation of coupled problems in soil mechanics and foundations. It contains analysis of both shallow and deep foundations. Several nonlinear problems are considered including, soil plasticity, cracking, reaching the soil bearing capacity, creep, etc. Dynamic analyses together with stability analysis are also included. Several numerical models of dams are considered together with coupled problems in soil mechanics and foundations. It gives wide range of modeling soil in different parts of the world. The volume is based on the best contributions to the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 – The official international congress of the Soil-Structure Interaction Group in Egypt (SSIGE).
Автор: Th. Triantafyllidis Название: Holistic Simulation of Geotechnical Installation Processes ISBN: 3319181696 ISBN-13(EAN): 9783319181691 Издательство: Springer Рейтинг: Цена: 130610.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Holistic Simulation of Geotechnical Installation Processes
Автор: Tomasz Sadowski; Tadeusz Balawender; Przemys?aw Go Название: Technological Aspects of Manufacturing and Numerical Modelling of Clinch-Adhesive Joints ISBN: 3319149016 ISBN-13(EAN): 9783319149011 Издательство: Springer Рейтинг: Цена: 60940.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This short book describes the basic technological aspects involved in the creation of purely clinch and clinch-adhesive joints made of different types of adherent materials and employing different joining technologies.
Название: Numerical Analysis and Modelling in Geomechanics ISBN: 0367863618 ISBN-13(EAN): 9780367863616 Издательство: Taylor&Francis Рейтинг: Цена: 67360.00 T Наличие на складе: Невозможна поставка. Описание: In this volume, experts describe how methods of analysis and modelling are used to answer questions associated with geomechanics, and give an insight into the future directions of those methods.
Автор: Olsson Karl Gunnar Название: Structural Mechanics: Modelling and Analysis of Frames and T ISBN: 1119159334 ISBN-13(EAN): 9781119159339 Издательство: Wiley Рейтинг: Цена: 53800.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This textbook in structural mechanics is based on the methodology of the finite element method. The understanding of basic elements of structural mechanics, springs, bars, beams and foundations, is gradually built up in one, two and three dimensions.
Автор: Fatahi Название: Sustainable Design and Construction for Geomaterials and Geostructures ISBN: 331995752X ISBN-13(EAN): 9783319957524 Издательство: Springer Рейтинг: Цена: 139750.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book presents recent research findings and critically reviews the existing literature related to assessment of geotechnical structures under complex and extreme loading conditions such as cyclic, seismic and blast loads.
Автор: Amin Chegenizadeh, Mahdi Keramatikerman Название: Mitigating Sulphate Attacks in Geotechnical Engineering ISBN: 1536123692 ISBN-13(EAN): 9781536123692 Издательство: Nova Science Рейтинг: Цена: 122490.00 T Наличие на складе: Невозможна поставка. Описание: A magnesium sulphate attack is one of the main issues that challenge civil engineering projects, in particular in coastal, landfill, and mining areas. This phenomenon reduces the stability of the structure and causes a complete failure for the system over time. Previous studies mainly focused on investigating the effects of magnesium sulphate attacks on concrete and from a structural point of view, and only a low number of studies investigated the effects of a magnesium sulphate attack on soil from a geotechnical point of view. The investigation on the effect of a magnesium sulphate attack is an important issue, particularly for stabilised soils that have a role in maintaining the integrity of foundations, slopes, embankments, etc. Portland cement (PC) is widely used in ground improvements and geotechnical engineering projects as an additive to improve the mechanical behaviour of soil. However, PC is effective to improve the engineering characteristics of soil; it is weak when exposed to the magnesium sulphate concentration. This book investigates the behaviour of different soils when treated with PC and after exposure to magnesium sulphate contamination. Also, the effect of some abundant materials in the environment such as carbon in the mechanical behaviour of stabilised soil has been investigated. The investigations have focused on shear strength and unconfined compressive strength (UCS) as two main important characteristics of stabilised soils, and they investigate their relevant characteristics. In this study, deep investigations have been conducted to figure out the behaviour of the magnesium sulphate concentration soils. However, additional research and study is required to procure a clear understanding of the interactions of the stabilised soils with magnesium sulphate concentration.
Автор: The Minerals Metals &. Materials Society Название: Tms 2022 151st Annual Meeting & Exhibition Supplemental Proceedings ISBN: 3030923800 ISBN-13(EAN): 9783030923808 Издательство: Springer Рейтинг: Цена: 260870.00 T Наличие на складе: Поставка под заказ. Описание: This collection presents papers from the 151st Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Автор: Hicks, Michael A. Название: Numerical Methods in Geotechnical Engineering ISBN: 1138001465 ISBN-13(EAN): 9781138001466 Издательство: Taylor&Francis Рейтинг: Цена: 331760.00 T Наличие на складе: Нет в наличии.
Автор: Clayton Chris R. I., Milititsky Jarbas, Woods Rick Название: Earth Pressure and Earth-Retaining Structures, Third Edition ISBN: 1466552115 ISBN-13(EAN): 9781466552111 Издательство: Taylor&Francis Рейтинг: Цена: 63280.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание:
Effectively Calculate the Pressures of Soil
When it comes to designing and constructing retaining structures that are safe and durable, understanding the interaction between soil and structure is at the foundation of it all. Laying down the groundwork for the non-specialists looking to gain an understanding of the background and issues surrounding geotechnical engineering, Earth Pressure and Earth-Retaining Structures, Third Edition introduces the mechanisms of earth pressure, and explains the design requirements for retaining structures. This text makes clear the uncertainty of parameter and partial factor issues that underpin recent codes. It then goes on to explain the principles of the geotechnical design of gravity walls, embedded walls, and composite structures.
What's New in the Third Edition:
The first half of the book brings together and describes possible interactions between the ground and a retaining wall. It also includes materials that factor in available software packages dealing with seepage and slope instability, therefore providing a greater understanding of design issues and allowing readers to readily check computer output. The second part of the book begins by describing the background of Eurocode 7, and ends with detailed information about gravity walls, embedded walls, and composite walls. It also includes recent material on propped and braced excavations as well as work on soil nailing, anchored walls, and cofferdams. Previous chapters on the development of earth pressure theory and on graphical techniques have been moved to an appendix.
Earth Pressure and Earth-Retaining Structures, Third Edition
is written for practicing geotechnical, civil, and structural engineers and forms a reference for engineering geologists, geotechnical researchers, and undergraduate civil engineering students.
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
