Название: Thin film shape memory alloys ISBN: 0521885760 ISBN-13(EAN): 9780521885768 Издательство: Cambridge Academ Рейтинг: Цена: 70960.00 T Наличие на складе: Есть Описание: Shape memory alloy (SMA) thin film materials and their microactuators are critical to modern device technology. Written by leading experts, this book provides a complete introduction to SMA thin film science. Covering properties, preparation, characterization, and applications in MEMS and biological devices, this is ideal for researchers and practitioners alike.
Автор: Chen Xizhang, Konovalov Sergey, Gromov Victor Название: Surface Processing of Light Alloys Subject to Concentrated Energy Flows ISBN: 9813342277 ISBN-13(EAN): 9789813342279 Издательство: Springer Рейтинг: Цена: 93160.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book presents studies on the surface modification of aluminum and titanium alloys by electric explosive alloying and electron-beam processing. The book is intended for specialists in the field of condensed matter physics, metallurgy and heat treatment and materials science, as well as graduate and senior students in relevant fields.
Автор: Eskin, Georgy I. (all-russia Institute Of Light Alloys, Moscow) Eskin, Dmitry G. (brunel University, Uxbridge, Uk) Название: Ultrasonic treatment of light alloy melts, second edition ISBN: 1138075973 ISBN-13(EAN): 9781138075979 Издательство: Taylor&Francis Рейтинг: Цена: 96970.00 T Наличие на складе: Нет в наличии. Описание:
Spawned by growing interest in ultrasonic technology and new developments in ultrasonic melt processing, the Second Edition of Ultrasonic Treatment of Light Alloy Melts discusses use of ultrasonic melt treatment in direct-chill casting, shape casting, rapid solidification, zone refining, and more, exploring the effects of power ultrasound on melt degassing, filtration, and refinement in aluminum and magnesium alloys. The fully revised and restructured Second Edition:
Contains new, in-depth coverage of composite and nanocomposite materials
Provides a historical review of the last century of ultrasonic applications to metallurgy
Emphasizes the fundamentals, mechanisms, and applications of ultrasonic melt processing in different light-metal technologies
Features new chapters on ultrasonic grain refinement, refinement of primary solid phases, and semi-solid processing of billets with nondendritic structure
Includes significant updates reflecting results obtained over the past two decades on different scales, from laboratory to full-scale industrial implementations
Complete with many new figures and examples, Ultrasonic Treatment of Light Alloy Melts, Second Edition delivers a comprehensive treatise on ultrasonic melt processing and cavitation, presenting essential guidelines for practical use and further development of the technology.
Автор: Srivatsan T S, Gupta M Название: High Entropy Alloys ISBN: 0367356333 ISBN-13(EAN): 9780367356330 Издательство: Taylor&Francis Рейтинг: Цена: 168430.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: The book gives a cohesive overview of innovations, advances in processing and characterization, and applications for high entropy alloys (HEAs) in performance-critical and non-performance-critical sectors. It covers manufacturing and processing, advanced characterization and analysis techniques and evaluation of mechanical and physical properties.
Автор: Porter David A., Easterling Kenneth E., Sherif Mohamed Y. Название: Phase Transformations in Metals and Alloys ISBN: 0367820773 ISBN-13(EAN): 9780367820770 Издательство: Taylor&Francis Рейтинг: Цена: 168430.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Revised to cover developments in the field over the past decade, the Fourth Edition provides information and examples that better illustrate the engineering relevance of this topic. It supplies a comprehensive overview of specific types of phase transformations, supplemented by practical case studies of engineering alloys.
Автор: Gromov, Victor , Knovalov, Sergey , Zaguliaev, D Название: Electron-Ion-Plasma Processing of Silumin ISBN: 0367493802 ISBN-13(EAN): 9780367493806 Издательство: Taylor&Francis Рейтинг: Цена: 193950.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This work details theoretical and experimental research and computer simulation of structural phase transformations in AlSi10Mn2Ni Silumin on different scale levels under electroexplosion alloying, electron beam processing and electron-plasma alloying at the nanolevel in order to create new materials.
Автор: DuPont Название: Welding Metallurgy and Weldability of Nickel-Base Alloys ISBN: 0470087145 ISBN-13(EAN): 9780470087145 Издательство: Wiley Рейтинг: Цена: 140390.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: The metallurgical behavior and "weldability" of nickel-base alloy welds is of critical engineering and commercial importance. Welding Metallurgy and Weldability of Nickel-Base Alloys provides the most up-to-date treatment on how the wide variety of nickel-base alloys respond to the heat and stresses that result from welding.
Автор: Thomas Sabu, Behera Ajit, Nguyen Tuan Anh Название: Nickel-Titanium Smart Hybrid Materials: From Micro- To Nano-Structured Alloys for Emerging Applications ISBN: 0323911730 ISBN-13(EAN): 9780323911733 Издательство: Elsevier Science Рейтинг: Цена: 218960.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Nickel-Titanium Smart Hybrid Materials: From Micro- to Nano-structured Alloys for Emerging Applications describes advanced properties that can be adapted in NiTi-alloys. Nickel-Titanium (NiTi) systems are receiving wide demand in growing industries due to their smart, high-temperature or biocompatible behavior. These influenced behaviors are carefully described in the micro-scale and nanoscale range, with NiTi smart materials described on the basis of their shape memory effect (SME) and super-elastic (SE) properties for sensor and actuator application. This book discusses novel properties of nickel-titanium systems, helping materials scientists and engineers produce smart technologies and systems for the aeronautical, automobile, mechanical, healthcare and electronics industries.
Автор: Damien FERON Название: Stress Corrosion Cracking of Nickel Based Alloys in Water-Cooled ISBN: 0081000499 ISBN-13(EAN): 9780081000496 Издательство: Elsevier Science Рейтинг: Цена: 157200.00 T Наличие на складе: Поставка под заказ. Описание: Stress Corrosion Cracking of Nickel Based Alloys in Water-Cooled Nuclear Reactors: The Coriou Effect presents the latest information on brittle failure of metals in corrosive chemical environments under the influence of tensile stresses. . Nickel alloys are more resistant to SCC as well as high temperatures and have been widely used in more challenging environments such as nuclear power plants. However, these alloys can suffer SCC under certain conditions, resulting in component failure. A key figure in understanding the mechanisms of SCC in nickel alloys in water-cooled nuclear reactors is Henri Coriou of the CEA, France’s leading center for nuclear research. This book assesses his work in the context of the latest research on SCC in nickel alloys in nuclear power plants.
Автор: John Everhart Название: Engineering Properties of Nickel and Nickel Alloys ISBN: 1468418866 ISBN-13(EAN): 9781468418866 Издательство: Springer Рейтинг: Цена: 95770.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Among alloys containing nickel are some having high corrosion resistance and others that retain excellent strength and ductility from temperatures approaching ab- solute zero to those near 2000 F. Some nickel alloys are strongly magnetic, others are virtually nonmagnetic;
Автор: Crundwell, Frank Название: Extractive Metallurgy of Nickel, Cobalt and Platinum Group Metals ISBN: 0080974783 ISBN-13(EAN): 9780080974781 Издательство: Elsevier Science Рейтинг: Цена: 162820.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book describes and explains the methods by which three related ores and recyclablesare made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metalsare key elements for materials processing. They occur together in one book because they(i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing.They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author’s previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores thisnecessitates amulti-contributor work drawing from multiple networks and both engineering and science.
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
