Proceedings of the 75th RILEM Annual Week 2021, Escalante-Garcia
Автор: Serna Название: Fibre Reinforced Concrete: Improvements and Innovations II ISBN: 3030837211 ISBN-13(EAN): 9783030837211 Издательство: Springer Рейтинг: Цена: 307450.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This volume highlights the latest advances, innovations, and applications in the field of fibre-reinforced concrete (FRC), as presented by scientists and engineers at the RILEM-fib X International Symposium on Fibre Reinforced Concrete (BEFIB), held in Valencia, Spain, on September 20-22, 2021. It discusses a diverse range of topics concerning FRC: technological aspects, nanotechnologies related with FRC, mechanical properties, long-term properties, analytical and numerical models, structural design, codes and standards, quality control, case studies, Textile-Reinforced Concrete, Geopolymers and UHPFRC. After the symposium postponement in 2020, this new volume concludes the publication of the research works and knowledge of FRC in the frame of BEFIB from 2020 to 2021 with the successful celebration of the hybrid symposium BEFIB 2021. The contributions present traditional and new ideas that will open novel research directions and foster multidisciplinary collaboration between different specialists.
Автор: Lars-Olof Nilsson Название: Methods of Measuring Moisture in Building Materials and Structures ISBN: 3030089428 ISBN-13(EAN): 9783030089429 Издательство: Springer Рейтинг: Цена: 102480.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: RILEM TC 248-MMB was established in 2012 with the main aim to improve and distribute knowledge related to moisture measurement in construction materials in various scientific and industrial applications. Properties and performance of building materials and structures are influenced to a large extent by the moisture conditions in the materials. Obvious examples are heat conductivity, shrinkage and creep, transport properties, most types of deterioration, discoloration etc. For research and applications the moisture conditions must be quantified, by measurements in the laboratory or under field conditions. There is much variation in methods being used, even within the same topic, in different countries, both with regard to materials and to applications. No consensus whatsoever does exist. For the construction industry it is important to be able to quantify the moisture conditions in an accurate way in various applications. This state-of-the-art report is divided into two parts, Principles and Applications, with altogether 28 chapters on various moisture measuring principles and a number of applications.
Автор: Kanavaris Название: International RILEM Conference on Early-Age and Long-Term Cracking in RC Structures ISBN: 3030729230 ISBN-13(EAN): 9783030729233 Издательство: Springer Рейтинг: Цена: 186330.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This volume gathers the latest advances, innovations and applications in the field of crack control in concrete, as presented by leading international researchers and engineers at the International RILEM Conference on Early-age and Long-term Cracking in RC Structures (CRC 2021), held in Paris, France on April 9, 2021.
Автор: Kanavaris Fragkoulis, Benboudjema Farid, Azenha Miguel Название: International Rilem Conference on Early-Age and Long-Term Cracking in Rc Structures: CRC 2021 ISBN: 3030729206 ISBN-13(EAN): 9783030729202 Издательство: Springer Цена: 186330.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This volume gathers the latest advances, innovations and applications in the field of crack control in concrete, as presented by leading international researchers and engineers at the International RILEM Conference on Early-age and Long-term Cracking in RC Structures (CRC 2021), held in Paris, France on April 9, 2021.
Автор: Serna Pedro, Llano-Torre Aitor, Martн-Vargas Josй R. Название: Fibre Reinforced Concrete: Improvements and Innovations II: X Rilem-Fib International Symposium on Fibre Reinforced Concrete (Befib) 2021 ISBN: 3030837181 ISBN-13(EAN): 9783030837181 Издательство: Springer Рейтинг: Цена: 307450.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This volume highlights the latest advances, innovations, and applications in the field of fibre-reinforced concrete (FRC), as presented by scientists and engineers at the RILEM-fib X International Symposium on Fibre Reinforced Concrete (BEFIB), held in Valencia, Spain, on September 20-22, 2021. It discusses a diverse range of topics concerning FRC: technological aspects, nanotechnologies related with FRC, mechanical properties, long-term properties, analytical and numerical models, structural design, codes and standards, quality control, case studies, Textile-Reinforced Concrete, Geopolymers and UHPFRC. After the symposium postponement in 2020, this new volume concludes the publication of the research works and knowledge of FRC in the frame of BEFIB from 2020 to 2021 with the successful celebration of the hybrid symposium BEFIB 2021. The contributions present traditional and new ideas that will open novel research directions and foster multidisciplinary collaboration between different specialists.
Автор: Breysse Denys, Balayssac Jean-Paul Название: Non-Destructive In Situ Strength Assessment of Concrete: Practical Application of the RILEM TC 249-ISC Recommendations ISBN: 3030649024 ISBN-13(EAN): 9783030649029 Издательство: Springer Рейтинг: Цена: 93160.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: The book presents the work of the RILEM Technical Committee 249-ISC. Addressing the effective application of new recommendations for non-destructive in situ strength assessment of concrete, it provides information about the different steps of the investigation and processing of test results, until the delivery of strength estimates, and includes tables giving the minimum required number of cores in a variety of situations as well as several examples of how the recommendations can be used in practice. The book explores a topic which is of major importance, i.e. the assessment of concrete compressive strength in existing structures. This property (both mean and standard deviation) is a key input in many cases, such as the reinforcement of structures, the safety checking, the extension of service life. As the new RILEM recommendations imply a deep revision (and improvement) of field practice, the book is intended for managers of structures, structural engineers and specialists of NDT that have to answer these issues. More widely, it will benefit engineers and students who are interested in NDT and in the safety analysis of structures.
Автор: Saouma Victor E. Название: Diagnosis & Prognosis of AAR Affected Structures: State-Of-The-Art Report of the Rilem Technical Committee 259-Isr ISBN: 3030440133 ISBN-13(EAN): 9783030440138 Издательство: Springer Рейтинг: Цена: 102480.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: The book is intended for practitioners responsible for concrete structures affected by the damaging alkali aggregate reaction, engineers dealing with aging structures, and researchers in the field.
Автор: Timothy Wangler; Robert J. Flatt Название: First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018 ISBN: 3030076032 ISBN-13(EAN): 9783030076030 Издательство: Springer Рейтинг: Цена: 186330.00 T Наличие на складе: Поставка под заказ. Описание: Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss National Centre for Competence in Research (NCCR) for Digital Fabrication in Architecture, which is highly interdisciplinary and unique worldwide. In 2018, this NCCR opened the “DFAB House”, which incorporates many digital fabrication principles for architecture. It is also responsible for the 600 m2 Robotic Fabrication Lab and the first robotically built roof in the world. Held in tandem with Rob|Arch 2018, the leading conference for robotics in architecture, RILEM deemed it the right time to combine forces at this new conference, which will be the first large conference to feature the work of the recently created RILEM Technical Committee on Digital Fabrication with Cement-based Materials, among other leaders in this new field worldwide. This conference proceedings brings together papers that take into account the findings in this new area. Papers reflect the varying themes of the conference, including Materials, Processing, Structure, and Applications.
Автор: Manfred N. Partl; Laurent Porot; Herv? Di Benedett Название: Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems ISBN: 3319890301 ISBN-13(EAN): 9783319890302 Издательство: Springer Рейтинг: Цена: 158380.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book presents the detailed results of five task groups of the RILEM technical committee TC 237-SIB on Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems. It concentrates on specific new topics in asphalt binder and mixture testing, dealing with new developments in asphalt testing, in particular also in view of new innovative bituminous materials, such as hot and cold recycled mixtures, grid reinforced pavements and recycled Reclaimed Asphalt Pavements (RAP), where test methods developed for traditional asphalt concrete are not a priori applicable. The main objective is providing a basis for pre-standardization by comparing different test methods and showing ways for fundamental improvements. Thus, the book also points the way for a further advanced chemo-physical understanding of materials and their role in pavement systems relying on fundamental material properties and suitable models for describing and predicting the intrinsic mechanisms that determine the material behavior.
Название: Test quality for construction, materials and structures ISBN: 0367863391 ISBN-13(EAN): 9780367863395 Издательство: Taylor&Francis Рейтинг: Цена: 67360.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book presents international views on this fast changing field, with the main themes of: technical components of test quality; quality assurance in testing laboratories; laboratory accreditation and transnational recognition of test results.
Автор: Mark Alexander; Alexandra Bertron; Nele De Belie Название: Performance of Cement-Based Materials in Aggressive Aqueous Environments ISBN: 9400798393 ISBN-13(EAN): 9789400798397 Издательство: Springer Рейтинг: Цена: 139310.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book reviews the nature and kinetics of degradation and deterioration of cement-based materials in aggressive aqueous environments, including modelling, test methods and implications and consequences of deterioration, with engineering approaches.
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
