Digital Fabrication with Cement-Based Materials: State-of-the-Art Report of the RILEM TC 276-DFC, Roussel Nicolas, Lowke Dirk

Автор: Amziane Sofiane, Collet Florence
Название: Bio-Aggregates Based Building Materials: State-Of-The-Art Report of the Rilem Technical Committee 236-Bbm
ISBN: 9402414703 ISBN-13(EAN): 9789402414707
Издательство: Springer
Рейтинг:
Цена: 158380.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The work of the RILEM Technical Committee (TC -236 BBM) was dedicated to the study of construction materials made from plant particles. It considered the question whether building materials containing as main raw material recyclable and easily available plant particles are renewable.

Автор: Fabbri Antonin, Morel Jean-Claude, Aubert Jean-Emmanuel
Название: Testing and Characterisation of Earth-Based Building Materials and Elements: State-Of-The-Art Report of the Rilem Tc 274-Tce
ISBN: 3030832961 ISBN-13(EAN): 9783030832964
Издательство: Springer
Рейтинг:
Цена: 83850.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents the work done by the RILEM Technical Committee 274-TCE. It focuses on the estimation of the parameters which are necessary to properly design earthen constructions. It provides a compilation of the value classically obtained for the key parameters of earthen materials, a pedagogical presentation of the main testing procedures for earthen materials, their advantage and their drawback and an overview of most standards on earthen materials, whatever their origin and their language. The book is divided into eight chapters. After a general introduction on earthen materials and constructions, the state of the art on the material characterisation technics, the assessment of hygrothermal performance, the mechanical behaviour, seismic resistance and the durability will be presented, each in a dedicated chapter. On the basis of these last chapters, a critical review of the standards which are used for earthen material will be presented in the last chapter. The last chapter is dedicated to the analysis of the environmental potential of earth-based building materials.

Автор: Timothy Wangler; Robert J. Flatt
Название: First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018
ISBN: 3319995189 ISBN-13(EAN): 9783319995182
Издательство: Springer
Рейтинг:
Цена: 186330.00 T
Наличие на складе: Нет в наличии.
Описание: Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss National Centre for Competence in Research (NCCR) for Digital Fabrication in Architecture, which is highly interdisciplinary and unique worldwide. In 2018, this NCCR opened the “DFAB House”, which incorporates many digital fabrication principles for architecture. It is also responsible for the 600 m2 Robotic Fabrication Lab and the first robotically built roof in the world. Held in tandem with Rob|Arch 2018, the leading conference for robotics in architecture, RILEM deemed it the right time to combine forces at this new conference, which will be the first large conference to feature the work of the recently created RILEM Technical Committee on Digital Fabrication with Cement-based Materials, among other leaders in this new field worldwide. This conference proceedings brings together papers that take into account the findings in this new area. Papers reflect the varying themes of the conference, including Materials, Processing, Structure, and Applications.

Автор: Timothy Wangler; Robert J. Flatt
Название: First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018
ISBN: 3030076032 ISBN-13(EAN): 9783030076030
Издательство: Springer
Рейтинг:
Цена: 186330.00 T
Наличие на складе: Нет в наличии.
Описание: Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss National Centre for Competence in Research (NCCR) for Digital Fabrication in Architecture, which is highly interdisciplinary and unique worldwide. In 2018, this NCCR opened the “DFAB House”, which incorporates many digital fabrication principles for architecture. It is also responsible for the 600 m2 Robotic Fabrication Lab and the first robotically built roof in the world. Held in tandem with Rob|Arch 2018, the leading conference for robotics in architecture, RILEM deemed it the right time to combine forces at this new conference, which will be the first large conference to feature the work of the recently created RILEM Technical Committee on Digital Fabrication with Cement-based Materials, among other leaders in this new field worldwide. This conference proceedings brings together papers that take into account the findings in this new area. Papers reflect the varying themes of the conference, including Materials, Processing, Structure, and Applications.

Автор: Bos Freek P., Lucas Sandra S., Wolfs Rob J. M.
Название: Second Rilem International Conference on Concrete and Digital Fabrication: Digital Concrete 2020
ISBN: 3030499154 ISBN-13(EAN): 9783030499150
Издательство: Springer
Цена: 279500.00 T
Наличие на складе: Нет в наличии.
Описание: This book is intended for periodontal residents and practicing periodontists who wish to incorporate the principles of moderate sedation into daily practice. Comprehensive airway management and rescue skills are then documented in detail so that the patient may be properly managed in the event that the sedation progresses beyond the intended level.

Автор: Shi, Caijun (hunan University, China) Yuan, Qiang (central South University, Hunan, China) He, Fuqiang (xiamen University Of Technology, China) Hu, Xi
Название: Transport and interactions of chlorides in cement-based materials
ISBN: 1138492701 ISBN-13(EAN): 9781138492707
Издательство: Taylor&Francis
Рейтинг:
Цена: 163330.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Chloride-induced corrosion crucially affects RC durability. This research monograph covers mechanisms, testing methods, physico-chemical interactions with cement hydrates, chloride binding isotherms, measurement of penetration, factors affecting chloride transport, and modelling and prevention.

Автор: Liew, Mohd Shahir
Название: Smart Nanoconcretes And Cement-Based Materials
ISBN: 012817854X ISBN-13(EAN): 9780128178546
Издательство: Elsevier Science
Рейтинг:
Цена: 211100.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:

Smart Nanoconcretes and Cement-Based Materials: Properties, Modelling and Applications explores the fundamental concepts and applications of smart nanoconcretes with self-healing, self-cleaning, photocatalytic, antibacterial, piezoelectrical, heating and conducting properties and how they are used in modern high-rise buildings, hydraulic engineering, highways, tunnels and bridges. This book is an important reference source for materials scientists and civil engineers who are looking to enhance the properties of smart nanomaterials to create stronger, more durable concrete.

Автор: Millard Alain, Pimienta Pierre
Название: Modelling of Concrete Behaviour at High Temperature: State-Of-The-Art Report of the Rilem Technical Committee 227-Hpb
ISBN: 3030119971 ISBN-13(EAN): 9783030119973
Издательство: Springer
Цена: 93160.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: 1 Scope.- 1.1 General comments .- 1.2 Context and objectives .- 2 Introduction.- 2.1 Physical aspects of heated concrete.- 2.2 Modelling .- 2.3 References.- 3 Engineering Modelling.- 3.1 General approach.- 3.2 Eurocode.- 3.3 Thermal analysis.- 3.4 Mechanical analysis.- 3.5 Spalling.- 3.6 Examples of national guidelines.- 3.7 Discussion, limits.- 3.8 References.- 4 Advanced Modelling.- 4.1 Concrete as multiphase porous material .- 4.2 Heat and mass transfer.- 4.3 Key points for modelling cement-based materials at high temperature.- 4.4 Numerical approach.- 4.5 Simplified one-fluid model.- 4.6 Simplified thermo-mechanical approach.- 4.7 Mechanical modelling.- 4.8 References.- 5 Constitutive Parameters.- 5.1 Hygral Parameters.- 5.2 Thermal Parameters.- 5.3 Mechanical Parameters.- 5.4 References.- 6 Conclusion.

Автор: Saouma Victor E.
Название: Diagnosis & Prognosis of AAR Affected Structures: State-Of-The-Art Report of the Rilem Technical Committee 259-Isr
ISBN: 3030440133 ISBN-13(EAN): 9783030440138
Издательство: Springer
Рейтинг:
Цена: 102480.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book is intended for practitioners responsible for concrete structures affected by the damaging alkali aggregate reaction, engineers dealing with aging structures, and researchers in the field.

Автор: Branco Jorge, Dietsch Philipp, Tannert Thomas
Название: Reinforcement of Timber Elements in Existing Structures: State-Of-The-Art Report of the Rilem Tc 245-Rte
ISBN: 3030677931 ISBN-13(EAN): 9783030677930
Издательство: Springer
Цена: 83850.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Introduction.- Self-tapping screws as reinforcement for structural timber elements.- Glued-in rods as reinforcement for timber structural elements.- Fiber-reinforced polymers as reinforcement for timber structural elements.- Nanocomposites as reinforcement for timber structural elements.- Reinforcement of Timber Structures: Standardization towards a new section for EC 5.- Seismic Reinforcement of Traditional Timber Structures. Reinforcement of Traditional Timber Frame Walls.- Reinforcement of Light-Frame Wood Structures.- Reinforcement of Historic Timber Roofs.- Retrofitting of traditional timber floors.- Reinforcement of Traditional Carpentry Joints.

Автор: Saouma Victor E.
Название: Diagnosis & Prognosis of AAR Affected Structures: State-of-the-Art Report of the RILEM Technical Committee 259-ISR
ISBN: 3030440168 ISBN-13(EAN): 9783030440169
Издательство: Springer
Цена: 102480.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book is intended for practitioners responsible for concrete structures affected by the damaging alkali aggregate reaction, engineers dealing with aging structures, and researchers in the field.

Автор: Branco Jorge, Dietsch Philipp, Tannert Thomas
Название: Reinforcement of Timber Elements in Existing Structures: State-of-the-Art Report of the RILEM TC 245-RTE
ISBN: 3030677966 ISBN-13(EAN): 9783030677961
Издательство: Springer
Рейтинг:
Цена: 83850.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: By presenting the work of the RILEM Technical Committee 245-RTE, the book provides an overview of the existing techniques for the reinforcement of timber elements, joints and structures. It consists of two parts: part I examines state-of-the-art information on reinforcement techniques, summarizes the current status of standardization, and covers STS, GiR, FRP and nanotechnology. In part II several applications of reinforcement are discussed: these include traditional structures, traditional timber frame walls, light-frame shear walls, roofs, floors, and carpentry joints. The book will benefit academics, practitioners, industry and standardization committees interested in the reinforcement of existing timber elements, joints and structures.