Fibre Reinforced Concrete: Improvements and Innovations: RILEM-fib International Symposium on FRC (BEFIB) in 2020, Serna Pedro, Llano-Torre Aitor, Martн-Vargas Josй R.

Автор: Sobral H. S.
Название: Vegetable Plants and their Fibres as Building Materials: Proceedings of the Second International RILEM Symposium
ISBN: 036758011X ISBN-13(EAN): 9780367580117
Издательство: Taylor&Francis
Рейтинг:
Цена: 34700.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book examines the state-of-the-art on plants and fibres as building materials for low cost construction, emphasizing their use, properties, fabrication, new procedures and future developments. It makes available research results on new techniques for fibre reinforcement and their use in concrete, stabilized clay and other matrices. Procedures

Автор: ?yvind Bj?ntegaard; Tor Arne Martius-Hammer; Matia
Название: RILEM Technical Committee 195-DTD Recommendation for Test Methods for AD and TD of Early Age Concrete
ISBN: 9401792658 ISBN-13(EAN): 9789401792653
Издательство: Springer
Рейтинг:
Цена: 121890.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This report presents the Round-Robin (RR) program and test results including a statistical evaluation of the RILEM TC195-DTD committee named "Recommendation for test methods for autogenous deformation (AD) and thermal dilation (TD) of early age concrete".

Автор: ?yvind Bj?ntegaard; Tor Arne Martius-Hammer; Matia
Название: RILEM Technical Committee 195-DTD Recommendation for Test Methods for AD and TD of Early Age Concrete
ISBN: 9402407987 ISBN-13(EAN): 9789402407983
Издательство: Springer
Рейтинг:
Цена: 95770.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This report presents the Round-Robin (RR) program and test results including a statistical evaluation of the RILEM TC195-DTD committee named "Recommendation for test methods for autogenous deformation (AD) and thermal dilation (TD) of early age concrete".

Автор: Timothy Wangler; Robert J. Flatt
Название: First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018
ISBN: 3319995189 ISBN-13(EAN): 9783319995182
Издательство: Springer
Рейтинг:
Цена: 186330.00 T
Наличие на складе: Поставка под заказ.
Описание: Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss National Centre for Competence in Research (NCCR) for Digital Fabrication in Architecture, which is highly interdisciplinary and unique worldwide. In 2018, this NCCR opened the “DFAB House”, which incorporates many digital fabrication principles for architecture. It is also responsible for the 600 m2 Robotic Fabrication Lab and the first robotically built roof in the world. Held in tandem with Rob|Arch 2018, the leading conference for robotics in architecture, RILEM deemed it the right time to combine forces at this new conference, which will be the first large conference to feature the work of the recently created RILEM Technical Committee on Digital Fabrication with Cement-based Materials, among other leaders in this new field worldwide. This conference proceedings brings together papers that take into account the findings in this new area. Papers reflect the varying themes of the conference, including Materials, Processing, Structure, and Applications.

Автор: Serna Pedro, Llano-Torre Aitor, Martн-Vargas Josй R.
Название: Fibre Reinforced Concrete: Improvements and Innovations: Rilem-Fib International Symposium on Frc (Befib) in 2020
ISBN: 303058481X ISBN-13(EAN): 9783030584818
Издательство: Springer
Цена: 354040.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This accessible guide will tell you everything you need to know about parenting a child with a hidden condition, such as autism, dyspraxia, ADHD or bipolar, whether or not a formal diagnosis has been received. With information on various conditions and diagnoses, it includes candid advice and strategies from parents as well as young adults who grew up with a hidden condition themselves.

Автор: Lily D. Poulikakos; Augusto Cannone Falchetto; Mic
Название: RILEM 252-CMB Symposium
ISBN: 3030131165 ISBN-13(EAN): 9783030131166
Издательство: Springer
Рейтинг:
Цена: 139750.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This volume contains the Proceedings of the RILEM TC 252-CMB International Symposium on the Chemo-Mechanical Characterization of Bituminous Materials. The Symposium was attended by researchers and practitioners from different fields presenting the latest findings in the chemical, mechanical, and microstructural characterization of bituminous materials. The book offers new and cutting edge papers on innovative techniques for the characterization of bituminous materials, gaining new insights into current issues such as effects of aging, moisture, and temperature.

Автор: Philip J. Nixon; Ian Sims
Название: RILEM Recommendations for the Prevention of Damage by Alkali-Aggregate Reactions in New Concrete Structures
ISBN: 9402404422 ISBN-13(EAN): 9789402404425
Издательство: Springer
Рейтинг:
Цена: 78350.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book contains the full set of RILEM Recommendations which have been produced to enable engineers, specifiers and testing houses to design and produce concrete which will not suffer damage arising from alkali reactions in the concrete.

Автор: Millard Alain, Pimienta Pierre
Название: Modelling of Concrete Behaviour at High Temperature: State-Of-The-Art Report of the Rilem Technical Committee 227-Hpb
ISBN: 3030119971 ISBN-13(EAN): 9783030119973
Издательство: Springer
Цена: 93160.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: 1 Scope.- 1.1 General comments .- 1.2 Context and objectives .- 2 Introduction.- 2.1 Physical aspects of heated concrete.- 2.2 Modelling .- 2.3 References.- 3 Engineering Modelling.- 3.1 General approach.- 3.2 Eurocode.- 3.3 Thermal analysis.- 3.4 Mechanical analysis.- 3.5 Spalling.- 3.6 Examples of national guidelines.- 3.7 Discussion, limits.- 3.8 References.- 4 Advanced Modelling.- 4.1 Concrete as multiphase porous material .- 4.2 Heat and mass transfer.- 4.3 Key points for modelling cement-based materials at high temperature.- 4.4 Numerical approach.- 4.5 Simplified one-fluid model.- 4.6 Simplified thermo-mechanical approach.- 4.7 Mechanical modelling.- 4.8 References.- 5 Constitutive Parameters.- 5.1 Hygral Parameters.- 5.2 Thermal Parameters.- 5.3 Mechanical Parameters.- 5.4 References.- 6 Conclusion.

Автор: Valente Isabel B., Ventura Gouveia Antуnio, Dias Salvador S.
Название: Proceedings of the 3rd Rilem Spring Convention and Conference (Rscc 2020): Volume 2: New Materials and Structures for Ultra-Durability
ISBN: 3030765504 ISBN-13(EAN): 9783030765507
Издательство: Springer
Цена: 139750.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The present volume is dedicated to the topic "New materials and structures for ultra-durability", which covers current scientific and technological developments aimed at improving knowledge about degradation mechanisms in construction materials, as well as to the development of new materials with extreme durability.

Автор: Chun Jiang, Pei Song
Название: Nonlinear-Emission Photonic Glass Fiber and Waveguide Devices
ISBN: 1108418457 ISBN-13(EAN): 9781108418454
Издательство: Cambridge Academ
Рейтинг:
Цена: 102430.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Present a comprehensive introduction to the design of compact and broadband fiber and waveguide devices using active-ion-doped photonic glasses. Covering the state-of-the-art in the field, new applications, and mathematical modeling, it is ideal for researchers, practitioners and students in optical and electrical engineering.

Автор: Bos Freek P., Lucas Sandra S., Wolfs Rob J. M.
Название: Second Rilem International Conference on Concrete and Digital Fabrication: Digital Concrete 2020
ISBN: 3030499154 ISBN-13(EAN): 9783030499150
Издательство: Springer
Цена: 279500.00 T
Наличие на складе: Поставка под заказ.
Описание: This book is intended for periodontal residents and practicing periodontists who wish to incorporate the principles of moderate sedation into daily practice. Comprehensive airway management and rescue skills are then documented in detail so that the patient may be properly managed in the event that the sedation progresses beyond the intended level.

Автор: Timothy Wangler; Robert J. Flatt
Название: First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018
ISBN: 3030076032 ISBN-13(EAN): 9783030076030
Издательство: Springer
Рейтинг:
Цена: 186330.00 T
Наличие на складе: Поставка под заказ.
Описание: Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss National Centre for Competence in Research (NCCR) for Digital Fabrication in Architecture, which is highly interdisciplinary and unique worldwide. In 2018, this NCCR opened the “DFAB House”, which incorporates many digital fabrication principles for architecture. It is also responsible for the 600 m2 Robotic Fabrication Lab and the first robotically built roof in the world. Held in tandem with Rob|Arch 2018, the leading conference for robotics in architecture, RILEM deemed it the right time to combine forces at this new conference, which will be the first large conference to feature the work of the recently created RILEM Technical Committee on Digital Fabrication with Cement-based Materials, among other leaders in this new field worldwide. This conference proceedings brings together papers that take into account the findings in this new area. Papers reflect the varying themes of the conference, including Materials, Processing, Structure, and Applications.