Machining and Machinability of Fiber Reinforced Polymer Composites, Hameed Sultan Mohamed Thariq, Azmi Azwan Iskandar, Majid Mohd Shukry Abd

Автор: Kaushik Kumar; Divya Zindani; Nisha Kumari; J. Pau
Название: Micro and Nano Machining of Engineering Materials
ISBN: 3030076423 ISBN-13(EAN): 9783030076429
Издательство: Springer
Рейтинг:
Цена: 102480.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book covers the recent developments in the production of micro and nano size products, which cater to the needs of the industry. The processes to produce the miniature sized products with unique characteristics are addressed. Moreover, their application in areas such as micro-engines, micro-heat exchangers, micro-pumps, micro-channels, printing heads and medical implants are also highlighted. The book presents such microsystem-based products as important contributors to a sustainable economy. The recent research in this book focuses on the development of new micro and nano manufacturing platforms while integrating the different technologies to manufacture the micro and nano components in a high throughput and cost effective manner. The chapters contain original theoretical and applied research in the areas of micro- and nano-manufacturing that are related to process innovation, accuracy, and precision, throughput enhancement, material utilization, compact equipment development, environmental and life-cycle analysis, and predictive modeling of manufacturing processes with feature sizes less than one hundred micrometers.

Автор: Jamal Ahmad
Название: Machining of Polymer Composites
ISBN: 1441942041 ISBN-13(EAN): 9781441942043
Издательство: Springer
Рейтинг:
Цена: 113180.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: A reference and source book for process design, tool and production engineers in composite manufacturing. It provides the reader with a treatment of the theory of machining as it applies to fiber reinforced polymer composites.

Автор: Helmi Youssef, Hassan El-Hofy
Название: Machining Technology and Operations 2-Volume Set
ISBN: 0367431319 ISBN-13(EAN): 9780367431310
Издательство: Taylor&Francis
Рейтинг:
Цена: 331760.00 T
Наличие на складе: Невозможна поставка.
Описание: This volume describes the fundamentals, basic elements, and operations of general-purpose machine tools used for the production of cylindrical and flat surfaces by turning, drilling, and reaming, shaping and planing, and milling processes.

Автор: M. S. Shunmugam; M. Kanthababu
Название: Advances in Unconventional Machining and Composites
ISBN: 9813294736 ISBN-13(EAN): 9789813294738
Издательство: Springer
Рейтинг:
Цена: 167700.00 T
Наличие на складе: Невозможна поставка.
Описание: This volume presents research papers on unconventional machining (also known as non-traditional machining and advanced manufacturing) and composites which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018).

Автор: M. S. Shunmugam; M. Kanthababu
Название: Advances in Unconventional Machining and Composites
ISBN: 9813294701 ISBN-13(EAN): 9789813294707
Издательство: Springer
Рейтинг:
Цена: 232910.00 T
Наличие на складе: Невозможна поставка.
Описание: This volume presents research papers on unconventional machining (also known as non-traditional machining and advanced manufacturing) and composites which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018).

Автор: E.L.K.E
Название: Laser Machining: Theory and Practice
ISBN: 1475740867 ISBN-13(EAN): 9781475740868
Издательство: Springer
Рейтинг:
Цена: 60940.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Laser Machining: Theory and Practice addresses state-of-the-art laser machining in a way useful for research- ers, academicians and practitioners, particularly manufacturing engineers, who are considering lasers as a solution to the machining requirements of their factories and plants.

Автор: J. Paulo Davim
Название: Nontraditional Machining Processes
ISBN: 1447159330 ISBN-13(EAN): 9781447159339
Издательство: Springer
Рейтинг:
Цена: 130590.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book explores techniques and processes that aim to achieve high accuracies and good surface finishes, parts machined without burrs or residual stresses especially with materials that cannot be machined by conventional methods.

Автор: Patel G. C. Manjunath, Chate Ganesh R., Parappagoudar Mahesh B.
Название: Machining of Hard Materials: A Comprehensive Approach to Experimentation, Modeling and Optimization
ISBN: 3030401014 ISBN-13(EAN): 9783030401016
Издательство: Springer
Рейтинг:
Цена: 55890.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents the potential applications of hard materials as well as the latest trends and challenges in machining hard materials. maximize: material removal rate, roundness and minimize: surface roughness, dimensional ovality, co axiality, tool wear) in machining for industry personal is solved using advanced optimization tools.

Автор: Huda, Zainul (department Of Mechanical Engineering, King Abdulaziz University, Jeddah, Saudi Arabia)
Название: Machining processes and machines
ISBN: 0367532697 ISBN-13(EAN): 9780367532697
Издательство: Taylor&Francis
Рейтинг:
Цена: 148010.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Machining is one of the eight basic manufacturing processes. This textbook covers the fundamentals and engineering analysis of both conventional and advanced material removal processes along with gear cutting/manufacturing and computer numerically controlled (CNC) machining.

Автор: Kaushik Kumar; Divya Zindani; Nisha Kumari; J. Pau
Название: Micro and Nano Machining of Engineering Materials
ISBN: 3319998994 ISBN-13(EAN): 9783319998992
Издательство: Springer
Рейтинг:
Цена: 93160.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book covers the recent developments in the production of micro and nano size products, which cater to the needs of the industry. The processes to produce the miniature sized products with unique characteristics are addressed. Moreover, their application in areas such as micro-engines, micro-heat exchangers, micro-pumps, micro-channels, printing heads and medical implants are also highlighted. The book presents such microsystem-based products as important contributors to a sustainable economy. The recent research in this book focuses on the development of new micro and nano manufacturing platforms while integrating the different technologies to manufacture the micro and nano components in a high throughput and cost effective manner. The chapters contain original theoretical and applied research in the areas of micro- and nano-manufacturing that are related to process innovation, accuracy, and precision, throughput enhancement, material utilization, compact equipment development, environmental and life-cycle analysis, and predictive modeling of manufacturing processes with feature sizes less than one hundred micrometers.

Автор: J. Paulo Davim
Название: Machining of Metal Matrix Composites
ISBN: 1447160452 ISBN-13(EAN): 9781447160458
Издательство: Springer
Рейтинг:
Цена: 104480.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: With each chapter written by an international expert in this vital field of research, this volume provides readers with all the fundamentals and the latest advances in the study of machining of MMCs, with a special focus on aluminium matrix composites.

Автор: Hossam A. Kishawy; Ali Hosseini
Название: Machining Difficult-to-Cut Materials
ISBN: 3030071197 ISBN-13(EAN): 9783030071196
Издательство: Springer
Рейтинг:
Цена: 121110.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book focus on the challenges faced by cutting materials with superior mechanical and chemical characteristics, such as hardened steels, titanium alloys, super alloys, ceramics and metal matrix composites. Aspects such as costs and appropriate machining strategy are mentioned. The authors present the characteristics of the materials difficult to cut and comment on appropriate cutting tools for their machining. This book also serves as a reference tool for manufacturers working in industry.