Materials for Additive Manufacturing, Shi Yusheng, Yan Chunze, Zhou Yan
Автор: Seeram Ramakrishna, Sunpreet Singh, Chander Prakas Название: Additive Manufacturing: Foundation Knowledge For The Beginners ISBN: 9811224811 ISBN-13(EAN): 9789811224812 Издательство: World Scientific Publishing Рейтинг: Цена: 84480.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: "This book provides the key fundamental principles, classifications, recent developments, as well as different applications of additive manufacturing technologies"--
Автор: Lillian White Название: Additive Manufacturing Materials: Standards, Testing & Applicability ISBN: 1634833023 ISBN-13(EAN): 9781634833028 Издательство: Nova Science Рейтинг: Цена: 121430.00 T Наличие на складе: Невозможна поставка. Описание: This book is the first step in a process to develop standards appropriate for the testing of the mechanical properties of metal parts made via additive manufacturing. This book investigates the current state-of-the-art methods for determining the properties of metal powders. This assessment evaluates both existing standards that provide guidance for powder property measurement methods, as well as technical publications describing methods that are not covered as completely by standards. Furthermore, the analysis shows that additive manufacturing-specific materials standards for characterising the properties of metal powders and metal parts do not have to be developed from scratch. Decades of powder property testing (born out of powder metallurgy processes) and mechanical property testing has resulted in a suite of existing standards that can form the basis needed for some additive manufacturing materials.
Автор: Bandar AlMangour Название: Additive Manufacturing of Emerging Materials ISBN: 3030062821 ISBN-13(EAN): 9783030062828 Издательство: Springer Рейтинг: Цена: 149060.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book provides a solid background for understanding the immediate past, the ongoing present, and the emerging trends of additive manufacturing, with an emphasis on innovations and advances in its use for a wide spectrum of manufacturing applications. It contains contributions from leading authors in the field, who view the research and development progress of additive manufacturing techniques from the unique angle of developing high-performance composites and other complex material parts. It is a valuable reference book for scientists, engineers, and entrepreneurs who are seeking technologically novel and economically viable innovations for high-performance materials and critical applications. It can also benefit graduate students and post-graduate fellows majoring in mechanical, manufacturing, and material sciences, as well as biomedical engineering.
Автор: David L. Bourell, Howard Kuhn, Mohsen Seifi, William Frazier Название: ASM Handbook, Volume 24: Additive Manufacturing Processes ISBN: 1627082883 ISBN-13(EAN): 9781627082884 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 317680.00 T Наличие на складе: Невозможна поставка. Описание: This brand new volume in the ASM Handbook series has been developed to address the current and rapidly expanding importance of additive manufacturing (AM). ASM Handbook, Volume 24: Additive Manufacturing Processes provides the latest knowledge in materials, processes, and applications of AM, written by the leading experts in research and industry.It begins with an introduction and history of AM, authored by some of the key participants in that history as they trace the evolution of AM. The complete suite of materials and processes for polymers and ceramics are described in detail in the next two divisions. A division on metal AM processes begins with an in-depth description of the production and characterization of metal powders, which has a big effect on the success or failure of metal AM processes. The book describes AM processing of a wide variety of materials, illustrating differences in characteristics of metal alloys produced by AM processes in contrast to conventional processes. Volume 24 also covers direct-write processes, which take advantage of AM processes to combine materials and devices for multifunctional engineering applications.
Автор: Francis Bitonti Название: 3D Printing Design: Additive Manufacturing and the Materials Revolution ISBN: 1474220967 ISBN-13(EAN): 9781474220965 Издательство: Bloomsbury Academic Рейтинг: Цена: 27450.00 T Наличие на складе: Невозможна поставка. Описание: To work with the materials of tomorrow, design students across visual arts disciplines need to understand the cutting edge of today. Whether you’re modelling in interiors, designing in fashion or constructing for interiors, in your work or as part of a final project, 3D Printing design is an encouraging guide to additive manufacturing within design disciplines. Francis Bitonti gives an insider’s view from his design studio on how 3D printing is already shaking up the industry, and where it’s likely to go next. Complete with interviews from designers, business owners and 3D-print experts throughout, Bitonti considers whether 3D body scans mean couture for all, how rapid prototyping can change your design method and if 3D printing materials can enhance medical design, amongst other areas of this emerging method of manufacture. This is inspirational reading for the designers of tomorrow.
Автор: AlMangour Название: Additive Manufacturing of Emerging Materials ISBN: 3319917129 ISBN-13(EAN): 9783319917122 Издательство: Springer Рейтинг: Цена: 149060.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book provides a solid background for understanding the immediate past, the ongoing present, and the emerging trends of additive manufacturing, with an emphasis on innovations and advances in its use for a wide spectrum of manufacturing applications.
Название: Additive manufacturing ISBN: 1498714773 ISBN-13(EAN): 9781498714778 Издательство: Taylor&Francis Рейтинг: Цена: 199050.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание:
Get Ready for the Future of Additive Manufacturing
Additive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)--the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This process enables users to quickly build three-dimensional objects from the bottom-up, adding material one cross-sectional layer at a time directly from a computer model. This book provides a clear overview of specific technologies related to AM. It covers existing and emerging techniques in AM in use for a wide spectrum of manufacturing applications, and highlights the advantages of each technique with specific references to technological applications.
Introduces Valuable Processes for Making Prototype Parts among Manufacturers of Many Types
The book outlines many of the processes developed using various materials ranging from metals to plastics, and composites to human tissue. It presents recent innovations and potential viable applications that include: near-net shape capabilities, superior design, geometric flexibility, innovations in fabrication using multiple materials, and reduced tooling and fixturing. It also introduces several illustrations and case studies that focus on the present and far-reaching applications, developments, and future prospects of AM technologies.
Written by renowned experts in their fields, this book:
Covers the reactive inkjet printing of nylon materials relevant to AM
Discusses the AM of metals using the techniques of free space deposition and selective laser melting
Provides a comparison between AM materials and human tissues
Addresses the use of AM for medical devices and drug and cell delivery
Focuses on the relevance of AM to rare earth magnets and more
Additive Manufacturing: Innovations, Advances, and Applications emphasizes the use of AM commensurate with advances in technical applications, and provides a solid background on the fundamentals and principles of this rapidly developing field.
Автор: Balasubramanian K. R., Senthilkumar V. Название: Additive Manufacturing Applications for Metals and Composites ISBN: 1799852431 ISBN-13(EAN): 9781799852438 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 129580.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Presents research on advancing methods and technological developments within additive manufacturing practices. Special attention is paid to the material design of additive manufacturing of parts, the choice of feedstock materials, and the metallurgical behavior and synthesis principle during the manufacturing process.
Автор: Chee Kai Chua, Hong Wei Tan, Hong Yee Low, Tuan Tran, Wai Yee Yeong Название: 3d Printing And Additive Manufacturing Of Electronics: Principles And Applications ISBN: 9811218358 ISBN-13(EAN): 9789811218354 Издательство: World Scientific Publishing Рейтинг: Цена: 126720.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: 3D printed electronics have captured much attention in recent years, owing to their success in allowing on-demand fabrication of highly-customisable electronics on a wide variety of substrates and conformal surfaces. This textbook helps readers understand and gain valuable insights into 3D printed electronics. It does not require readers to have any prior knowledge on the subject.3D Printing and Additive Manufacturing of Electronics: Principles and Applications provides a comprehensive overview of the recent progress and discusses the fundamentals of the 3D printed electronics technologies, their respective advantages, shortcomings and potential applications. The book covers conventional contact printing techniques for printed electronics, 3D electronics printing techniques, materials and inks inks for 3D-printed electronics, substrates and processing for 3D-printed electronics, sintering techniques for metallic nanoparticle inks, designs and simulations, applications of 3D-printed electronics, and future trends. The book includes several related problems for the reader to test his or her understanding of the topics.This book is a good guide for anyone who is interested in the 3D printing of electronics. The book is also an effective textbook for undergraduate and graduate courses that aim to arm their students with a thorough understanding of the fundamentals of 3D printed electronics.Related Link(s)
Additive Manufacturing (AM) technologies are developing impressively and are expected to bring about the next revolution. AM is gradually replacing traditional manufacturing methods in some applications because of its unique properties of customisability and versatility. This book provides a very comprehensive and updated text about different types of AM technologies, their respective advantages, shortcomings and potential applications.
3D Printing and Additive Manufacturing: Principles and Applications is a comprehensive textbook that takes readers inside the world of additive manufacturing. This book introduces the different types of AM technologies, categorised by liquid, solid and powder-based AM systems, the common standards, the trends in the field and many more.
Easy to understand, this book is a good introduction to anyone interested in obtaining a better understanding of AM. For people working in the industry, this book will provide information on new methods and practices, as well as recent research and development in the field. For professional readers, this book provides a comprehensive guide to distinguish between the different technologies, and will help them make better decisions regarding which technology they should use. For the general public, this book sheds some light on the fast-moving AM field.
In this edition, new AM standards (e.g. Standard of Terminology and Classification of AM systems) and format standards will be included, Furthermore, the listing of new machines and systems, materials, and software; as well as new case studies and applications in industries that have recently adopted AM (such as the Marine and Offshore industry) have also been incorporated.
Автор: Yan, Chunze Название: Selective Laser Sintering Additive Manufacturing Technology ISBN: 0081029934 ISBN-13(EAN): 9780081029930 Издательство: Elsevier Science Рейтинг: Цена: 325630.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание:
Selective Laser Sintering Additive Manufacturing Technology is a unique and comprehensive guide to this emerging technology. It covers in detail the equipment, software algorithms and control systems, material preparations and process technology, precision control, simulation analysis, and provides examples of applications of selective laser sintering (SLS).
SLS technology is one of the most promising advances in 3D printing due to the high complexity of parts it can form, short manufacturing cycle, low cost, and wide range of materials it is compatible with. Typical examples of SLS technology include SLS manufacturing casting molds, sand molds (core), injection molds with conformal cooling channels, and rapid prototyping of ceramic and plastic functional parts. It is already widely used in aviation, aerospace, medical treatment, machinery, and numerous other industries.
Drawing on world-leading research, the authors provide state of the art descriptions of the technologies, tools, and techniques which are helping academics and engineers use SLS ever more effectively and widely.
Автор: Chee Kai Chua, Hong Wei Tan, Hong Yee Low, Tuan Tran, Wai Yee Yeong Название: 3d Printing And Additive Manufacturing Of Electronics: Principles And Applications ISBN: 9811218935 ISBN-13(EAN): 9789811218934 Издательство: World Scientific Publishing Рейтинг: Цена: 52800.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: 3D printed electronics have captured much attention in recent years, owing to their success in allowing on-demand fabrication of highly-customisable electronics on a wide variety of substrates and conformal surfaces. This textbook helps readers understand and gain valuable insights into 3D printed electronics. It does not require readers to have any prior knowledge on the subject.3D Printing and Additive Manufacturing of Electronics: Principles and Applications provides a comprehensive overview of the recent progress and discusses the fundamentals of the 3D printed electronics technologies, their respective advantages, shortcomings and potential applications. The book covers conventional contact printing techniques for printed electronics, 3D electronics printing techniques, materials and inks inks for 3D-printed electronics, substrates and processing for 3D-printed electronics, sintering techniques for metallic nanoparticle inks, designs and simulations, applications of 3D-printed electronics, and future trends. The book includes several related problems for the reader to test his or her understanding of the topics.This book is a good guide for anyone who is interested in the 3D printing of electronics. The book is also an effective textbook for undergraduate and graduate courses that aim to arm their students with a thorough understanding of the fundamentals of 3D printed electronics.Related Link(s)
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
