Mechanical Reliability: Prediction and Management Under Extreme Load Conditions, Grynchenko Oleksandr, Alfyorov Oleksiy
Автор: Kцhler Michael, Jenne Sven, Pцtter Kurt Название: Load Assumption for Fatigue Design of Structures and Components: Counting Methods, Safety Aspects, Practical Application ISBN: 366256873X ISBN-13(EAN): 9783662568736 Издательство: Springer Рейтинг: Цена: 93160.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Understanding the fatigue behaviour of structural components under variable load amplitude is an essential prerequisite for safe and reliable light-weight design. For designing and dimensioning, the expected stress (load) is compared with the capacity to withstand loads (fatigue strength).
Автор: Michael K?hler; Sven Jenne; Kurt P?tter; Harald Ze Название: Load Assumption for Fatigue Design of Structures and Components ISBN: 3642552471 ISBN-13(EAN): 9783642552472 Издательство: Springer Рейтинг: Цена: 121110.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Understanding the fatigue behaviour of structural components under variable load amplitude is an essential prerequisite for safe and reliable light-weight design.For designing and dimensioning, the expected stress (load) is compared with the capacity to withstand loads (fatigue strength).
Автор: Claudio Giulio di Prisco; David Muir Wood Название: Mechanical Behaviour of Soils Under Environmentallly-Induced Cyclic Loads ISBN: 3709117615 ISBN-13(EAN): 9783709117613 Издательство: Springer Рейтинг: Цена: 174130.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book examines the mechanical response of granular and cohesive soils under cyclic loading, offering theoretical and analytical tools to evaluate settling under environmentally induced loads such as wave motion, wind action and varying water table levels.
Автор: Jun Wu; Hao Wu; Hong Wei Andy Tan; Soon Hoe Chew Название: Multi-layer Pavement System under Blast Load ISBN: 9811352895 ISBN-13(EAN): 9789811352898 Издательство: Springer Рейтинг: Цена: 139750.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book proposes the concept of a multi-layer pavement system to fulfill the blast resistance requirement for pavement design. It also presents a damage pattern chart for multi-layer pavement design and rapid repair after blast load. Such a multi-layer system consists of three layers including asphalt concrete (AC) reinforced with Geogrid (GST) at the top, a high-strength concrete (HSC) layer in the middle, and engineered cementitious composites (ECC) at the bottom. A series of large-scale laboratory impact tests were carried out to prove the usefulness of this concept and show its advantages over other conventional pavement system. Furthermore, field blast tests were conducted to show the actual behavior of this multi-layer pavement system subjected to blast load under real-world conditions.
Автор: Janos Ginsztler; R.P. Skelton Название: Component Reliability under Creep-Fatigue Conditions ISBN: 3211829148 ISBN-13(EAN): 9783211829141 Издательство: Springer Рейтинг: Цена: 113190.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Failure prevention, residual life assessment, and life extension of materials in components operating at high temperatures are becoming important problems in the power plant industry. This work covers these problems, and introduces industrial examples to illustrate the applications of the subjects covered using the results from service records.
Автор: Andreas K?chele Название: Turbocharger Integration into Multidimensional Engine Simulations to Enable Transient Load Cases ISBN: 3658287853 ISBN-13(EAN): 9783658287856 Издательство: Springer Рейтинг: Цена: 46570.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Despite the increasing interest in multidimensional combustion engine simulation from researchers and industry, the field of application has been restricted to stationary operating points for turbocharged engines.
Автор: Melchers Название: Structural Reliability Analysis and Prediction, 3e ISBN: 1119265991 ISBN-13(EAN): 9781119265993 Издательство: Wiley Рейтинг: Цена: 89710.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание:
Structural Reliability Analysis and Prediction, Third Edition is a textbook which addresses the important issue of predicting the safety of structures at the design stage and also the safety of existing, perhaps deteriorating structures. Attention is focused on the development and definition of limit states such as serviceability and ultimate strength, the definition of failure and the various models which might be used to describe strength and loading. This book emphasises concepts and applications, built up from basic principles and avoids undue mathematical rigour. It presents an accessible and unified account of the theory and techniques for the analysis of the reliability of engineering structures using probability theory.
This new edition has been updated to cover new developments and applications and a new chapter is included which covers structural optimization in the context of reliability analysis. New examples and end of chapter problems are also now included.
Автор: Matthias F?rch Название: Analysis of Glass Panels Subjected to Blast Load ISBN: 3662590867 ISBN-13(EAN): 9783662590867 Издательство: Springer Рейтинг: Цена: 46570.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: The present doctoral dissertation contributes to the analysis of glass panels subjected to blast load, concentrating on monolithic and laminated glass prior to glass fracture. A straightforward graphical solution for monolithic glass is presented to identify maximum deformation and maximum principal stress for small and large deformations for static and idealized blast load without software. On the basis of experimental tests, load duration factors kmod for impact and blast load design for annealed glass, heat strengthened glass and fully tempered glass are proposed. In addition, design strength values for impact and blast design based on the European and German standards are suggested. As a result, blast pressure capacity charts for monolithic fully tempered glass plates subjected to idealized blast load are presented. Moreover, design temperatures of interlayer in blast design situation based on empirical data in accordance with Eurocode are determined for vertical double glazed and triple glazed units for Germany, showing that laminated glass should not be regarded with monolithic glass approach in general.
Consider a Viable and Cost-Effective Platform for the Industries of the Future (IOF)
Benefit from improved safety, performance, and product deliveries to your customers. Achieve a higher rate of equipment availability, performance, product quality, and reliability. Integrated Reliability: Condition Monitoring and Maintenance of Equipment incorporates reliable engineering and mathematical modeling tohelp you move toward sustainable development in reliability condition monitoring and maintenance. This text introduces a cost-effective integrated reliability growth monitor, integrated reliability degradation monitor, technological inheritance coefficient sensors, and a maintenance tool that supplies real-time information for predicting and preventing potential failures of manufacturing processes and equipment.
The author highlights five key elements that are essential to any improvement program: improving overall equipment and part effectiveness, quality, and reliability; improving process performance with maintenance efficiency and effectiveness; training all employees involved; including operators in the daily maintenance and upkeep of the equipment; and implementing early equipment management and maintenance prevention design. He offers a sustainable solution with integrated reliability condition monitoring and maintenance of manufacturing processes, parts, and equipment in the IOFs with a technological inheritance model-based program.
This book contains 15 chapters that include details on:
Improving the material-part-equipment system life cycle, reliability conditions, and manufacturing process productivity for wear, corrosion, and temperature resistance applications
Maximizing the component and system reliability growth of parts and equipment
Minimizing reliability degradation within the framework of a condition-based maintenance
Analyzing the reliability degradation, wear, and other competing failure modes of nickel-based hard alloy-coated part mating surface with a technological inheritance model-based program
Introducing a cost-effective integrated reliability monitor and maintenance strategy with a technological inheritance model-based software program
Integrated Reliability: Condition Monitoring and Maintenance of Equipment addresses potential failures from an asset manager, maintenance user, and operator's standpoint, and highlights the solutions to common failures and reliability problems for equipment in the IOFs.
Автор: Zenon Mr?z; Dieter Weichert; Stanislaw Dorosz Название: Inelastic Behaviour of Structures under Variable Loads ISBN: 0792333977 ISBN-13(EAN): 9780792333975 Издательство: Springer Рейтинг: Цена: 278580.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This collection of papers is a state of the art presentation of theories and methods related to the problem of the behaviour of mechanical structures under variable loads beyond their elastic limit In particular, the problems of shakedown, ratchetting, transient and asymptotic cyclic states are addressed.
Автор: Andrew E. Perkins; Suresh K. Sitaraman Название: Solder Joint Reliability Prediction for Multiple Environments ISBN: 1441946349 ISBN-13(EAN): 9781441946348 Издательство: Springer Рейтинг: Цена: 104480.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Here is a text that will provide industry engineers, graduate students, academic researchers, and reliability experts with insights and useful tools for evaluating solder joint reliability of ceramic area array electronic packages under multiple environments.
Автор: Holm Altenbach; Michael Br?nig Название: Inelastic Behavior of Materials and Structures Under Monotonic and Cyclic Loading ISBN: 3319362844 ISBN-13(EAN): 9783319362847 Издательство: Springer Рейтинг: Цена: 95770.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book presents studies on the inelastic behavior of materials and structures under monotonic and cyclic loads. The various models are based on different approaches and methods and scaling aspects are taken into account. In addition to purely phenomenological models, the book also presents mechanisms-based approaches.
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
