Injection molds for beginners, Dangel, Rainer

Автор: Hans-Peter Heim
Название: Specialized Injection Molding Techniques
ISBN: 0323341004 ISBN-13(EAN): 9780323341004
Издательство: Elsevier Science
Рейтинг:
Цена: 194260.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: . Special Injection Molding Techniques covers several techniques used to create multicomponent products, hollow areas, and hard-soft combinations that cannot be produced with standard injection molding processes. It also includes information on the processing techniques of special materials, including foaming agents, bio-based materials, and thermosets. . The book describes the most industrially relevant special injection molding techniques, with a detailed focus on understanding the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior, also providing an explanation of process routes and their variants, and discussions of the most influencing process parameters. As special molding technologies have the potential to transform plastics processing to a highly-efficient, integrated type of manufacturing, this book provides a timely survey of these technologies, putting them into context, accentuating new opportunities, and giving relevant information on processing.

Название: Understanding Injection Molds 2e
ISBN: 1569908435 ISBN-13(EAN): 9781569908433
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 83590.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Understanding Injection Molds opens up the entire subject of injection mold technology, including numerous special procedures, in a well-grounded and practical way. It is specifically intended for beginners, young professionals, business owners, and engineering students. The chapters are clearly structured and easy to understand. The book is designed so that it provides a complete basic knowledge of injection molds in chronological order as well as day-to-day guidance and advice.The numerous colour figures facilitate a rapid understanding of the content, which is especially helpful to the beginner who wants to learn about injection molds quickly. In the forefront of the description are thermoplastic molds. Divergent processes for thermoset or elastomer molds are explained at the end of each chapter. This book captures the current state of the art, and is written by authors who are specialists in the field. The second edition has been updated and improved throughout.

Автор: Gordon
Название: Total Quality Process Control for Injection Molding 2e
ISBN: 0470229632 ISBN-13(EAN): 9780470229637
Издательство: Wiley
Рейтинг:
Цена: 194250.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book highlights the importance of quality control for injection molding ? the most commonly used plastics manufacturing method. It provides the guidance and information to apply quality assurance methods so that plastic parts are produced ?right the first time? and through all manufacturing operations.

Название: Injection Molding Processing Data 2e
ISBN: 1569906661 ISBN-13(EAN): 9781569906668
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 14210.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: You need reliable initial processing data before setting up an injection molding machine to optimize and stabilize the process if you want to guarantee excellent results. A good set up can save you time and money. This powerful tool will provide you with the most important processing data, such as viscosity, thermal properties, mold temperatures, and suggested heater temperatures for the most commonly used materials in injection molding.Pocket-sized and condensed - yet clear and comprehensive!The PLASTICS POCKET POWER Series was developed with the plastics processor in mind. Its small, 3""X5"" size makes it a convenient resource tool for people to carry with them. These books are practical reference tools that contain all of the pertinent data plastics processors need to overcome the day-to-day challenges they encounter. The unique spiral binding of these books lets the user easily flip through the pages, mark their most-often used pages by keeping them flipped open, and allows the book to lay flat.

Автор: John Goff
Название: Injection Molding of Thermoplastics Materials - 1
ISBN: 0442303068 ISBN-13(EAN): 9780442303068
Издательство: Springer
Рейтинг:
Цена: 87070.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: During the years 1987 and 1988 we published a series of articles on the molding of thermoplastics materials in the magazine British Plastics and Rubber (B P & R).

Автор: Zhou
Название: Computer Modeling for Injection Molding - Simulation, Optimization, and Control
ISBN: 0470602996 ISBN-13(EAN): 9780470602997
Издательство: Wiley
Рейтинг:
Цена: 138280.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book covers a wide range of applications and uses of simulation and modeling techniques in polymer injection molding, filling a noticeable gap in the literature of design, manufacturing, and the use of plastics injection molding.

Автор: Cao, Peng
Название: Feedstock Tech For Reactive Metal Injection Molding
ISBN: 012817501X ISBN-13(EAN): 9780128175019
Издательство: Elsevier Science
Рейтинг:
Цена: 132500.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:

Feedstock Tech for Reactive Metal Injection Molding: Process, Design, and Application provides an authoritative guide on the basics of feedstock technology and the latest developments in binders for titanium metal injection moulding and their potential implications. In addition, the book presents challenges that MIM technology of reactive metals is currently facing and potential solutions for commercial success. As both commercial growth and research development are fundamentally driven by the economics of manufacture, this book presents the problems and potential solutions regarding reactive metals, making it a valuable resource for engineers intending to utilize MIM in commercial product design.

Автор: Rong Zheng; Roger I. Tanner; Xi-Jun Fan
Название: Injection Molding
ISBN: 3642445160 ISBN-13(EAN): 9783642445163
Издательство: Springer
Рейтинг:
Цена: 104480.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This practical volume covers the fundamental principles and numerical methods related to modeling the injection molding process. It addresses the cutting edge of our understanding of simulation technologies, without losing sight of useful classical approaches.