Phase Transformations and Heat Treatments of Steels, Ray, Bankim Chandra , Prusty, Rajesh Kumar , Nay

Автор: Ray, Bankim Chandra , Prusty, Rajesh Kumar , Nay
Название: Phase Transformations and Heat Treatments of Steels
ISBN: 0367028689 ISBN-13(EAN): 9780367028688
Издательство: Taylor&Francis
Рейтинг:
Цена: 142910.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: In this book, phase transformation is described to obtain a desirable phases by performing heat treatment operations in steels. Further, it has special and critical heat treatment practices, case studies, local and in-service heat treatments, curative and preventive measures of related defects for several common and high-performance applications.

Автор: Harry MacDonald Steels
Название: Dynamic mentoring for civil engineers
ISBN: 0727730037 ISBN-13(EAN): 9780727730039
Издательство: Thomas Telford
Рейтинг:
Цена: 41190.00 T
Наличие на складе: Нет в наличии.

Автор: Arunansu Haldar; Satyam Suwas; Debashish Bhattacha
Название: Microstructure and Texture in Steels
ISBN: 1447160037 ISBN-13(EAN): 9781447160038
Издательство: Springer
Рейтинг:
Цена: 325160.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Transformation Textures Associated with Steel Processing.- Mathematics of Crystallographic Texture in Martensitic and Related Transformations.- Structure and Strength of IF Steel After Large Strain Deformation.- The Coming of Grain Boundary Engineering in the 21st Century.- Control of Texture and Microstructure in Steels.- Texture Development in Low Carbon Sheet Steels for Automotive Application.- Texture and Microstructure Evolution at the Metal-Vapour Interface During Transformation Annealing in a Mn and Al Alloyed Ultra Low Carbon Steel.- Precipitation Behavior and Textural Evolution in Interstitial Free High Strength (IFHS) Steels.- Texture, Microstructure and Properties of Coatings on a few Industrially Produced Galvanized and Galvannealed Interstitial Free Steels.- Effects of Microalloying in Multi Phase Steels for Car Body Manufacture.- State-of-the-Science of High Manganese TWIP Steels for Automotive Applications.- Third Generation of AHSS: Microstructure Design Concepts.- Modeling.- Crystal Plasticity Based Modelling of Deformation Textures.- Simulation of Persistence Characteristics of Textures During Plastic Deformation.- DXRD and Its Applications Leading to New Modelling.- 3D Image-Based Viscoplastic Response with Crystal Plasticity.- Specialized Characterization Techniques.- Diffraction Techniques in Steel Research: An Overview.- Non-Contact Non-Destructive Measurement of Texture Using an Electro-Magnetic Acoustic Transducer (EMAT) Sensor.- Texture Transition in Steel ST37K, in situ Measurement at High Temperatures Using High-Energy X-rays.- Texture and Microstructure Development During Special Processes and Materials.- Ultra-fine Grain Materials by Severe Plastic Deformation: Application to Steels.- Development of Texture from the HAZ to Weldmetal Across the Fusion Boundary.- Evolution of Recrystallization Texture in AISI300 Series Austenitic Stainless Steels After Cold Rolling to Large Strain.- Deformation and Recrystallization Textures in Iron Aluminides.- Effect of Nanocrystallization on the Phase Stability of Al-Cu-Ti and Al-Cu-Nb Metallic Systems.- Contributory Papers.- Investigation of Microstructure Development During ?-?-? Phase Transformation in Steel by Using High Temperature in situ EBSD.- A New Flow Function to Model Texture Evolution in Symmetric and Asymmetric Rolling.- Microstructure and Texture Evolution During the Accumulative Roll Bonding of Pure Ni.- Microstructure of the Rust Formed on Si-Al Bearing Ultrafine-Grained Weathering Steel.- Microstructure Evolution in Three FCC Materials During Limited Dome Height Test.- The Facet Method for the Description of Yield Loci of Textured Materials.- The Hall-Petch Relationship in Interstitial-Free Steel Processed by Equal Channel Angular Extrusion.- Evolution of Crystallographic Texture During Equal Channel Angular Extrusion (ECAE) of (?+?) Brass.- Grain Growth in ECAE Processed Pure Magnesium.- Solidification Microstructure and Texture in Grain-Refined Titanium Alloys.- Effect of Intercritical Heat Treatment on the Abrasive Wear Behaviour of Plain Carbon Dual Phase Steel.

Автор: Edmonds David, Pereloma Elena, Pereloma E.
Название: Phase Transformations in Steels: Fundamentals and Diffusion-Controlled Transformations
ISBN: 0081016271 ISBN-13(EAN): 9780081016275
Издательство: Elsevier Science
Рейтинг:
Цена: 218960.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production.

Автор: Wei Yan; Wei Wang; Yiyin Shan; Ke Yang; Wei Sha
Название: 9-12Cr Heat-Resistant Steels
ISBN: 3319148389 ISBN-13(EAN): 9783319148380
Издательство: Springer
Рейтинг:
Цена: 130610.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: With China becoming a major force in steel research and development, this book highlights the work of a group from the Chinese Academy of Sciences, led by the first four authors.

Автор: Wei Yan; Wei Wang; Yiyin Shan; Ke Yang; Wei Sha
Название: 9-12Cr Heat-Resistant Steels
ISBN: 3319365177 ISBN-13(EAN): 9783319365176
Издательство: Springer
Рейтинг:
Цена: 95770.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: With China becoming a major force in steel research and development, this book highlights the work of a group from the Chinese Academy of Sciences, led by the first four authors.

Автор: Baghdasarian A. J.
Название: Corrosion Resistance of Trip Steels
ISBN: 1288824629 ISBN-13(EAN): 9781288824625
Издательство: Неизвестно
Рейтинг:
Цена: 71050.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
The Office of Scientific & Technical Information (OSTI), is a part of the U.S. Department of Energy (DOE) that houses research and development results from projects funded by the DOE. The information is generally an article, technical document, conference paper or dissertation. This is one of those publications.

Автор: Yuqing Weng; Han Dong; Yong Gan
Название: Advanced Steels
ISBN: 3642443028 ISBN-13(EAN): 9783642443022
Издательство: Springer
Рейтинг:
Цена: 348290.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: "Advanced Steels: The Recent Scenario in Steel Science and Technology" contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China.

Автор: G. Rabensteiner; Erich Folkhard; E. Perteneder; H.
Название: Welding Metallurgy of Stainless Steels
ISBN: 3709189675 ISBN-13(EAN): 9783709189672
Издательство: Springer
Рейтинг:
Цена: 87070.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: In this way we aim to help overcome a certain degree of insecurity that is often encountered in welding shops engaged in the welding of stainless steels and is often the cause of welding problems which may in some instances lead to the premature failure of the welded component.

Автор: K. Yagi; G. Merckling; T.U. Kern; H. Irie; H. Warl
Название: Creep Properties of Heat Resistant Steels and Superalloys
ISBN: 3540428798 ISBN-13(EAN): 9783540428794
Издательство: Springer
Рейтинг:
Цена: 3158460.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.

Автор: Jayanta Kumar Saha
Название: Corrosion of Constructional Steels in Marine and Industrial Environment
ISBN: 8132217098 ISBN-13(EAN): 9788132217091
Издательство: Springer
Рейтинг:
Цена: 104480.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: An exhaustive research study on atmospheric corrosion of structural steel, this important publication, with numerous illustrations, details investigative methods for a better understanding of the degradation process, and mixes for high-performance paints.

Автор: Hubertus Colpaert
Название: Metallography of Steels: Interpretation of Structure and the Effects of Processing
ISBN: 1627081488 ISBN-13(EAN): 9781627081481
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 222690.00 T
Наличие на складе: Невозможна поставка.
Описание: This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur.First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added.Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.