This second edition of Design of Clothing Manufacturing Processes comprehensively addresses the design and planning of clothing manufacturing processes, beginning with the classification of clothing and discussion of its market, clothing sizing systems, and the key issues involved in developing a fashion collection. Special emphasis is placed on production planning and control, with detailed coverage of the processes of design, pattern making and cutting, joining techniques, work analysis, clothing manufacturing planning, and the behaviour, performance, and quality of materials critical to the development, planning, and control of manufacturing processes and the sale of garments.
With its descriptions of the rapid, integrated, and flexible manufacturing systems of today, driven by demand information, this book explains how new supply chain models and manufacturing processes can lead to a much quicker route from design to distribution. This new edition is updated with important new research and topics, including digital fashion incorporating scientific aspects of fabric modelling, simulation and digital fitting, and the performance of seams as an important criterion for the quality and appearance of clothing.
Автор: Andr?s D?az Lantada Название: Microsystems for Enhanced Control of Cell Behavior ISBN: 3319293265 ISBN-13(EAN): 9783319293264 Издательство: Springer Рейтинг: Цена: 156720.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Part I Fundamentals.- Introduction to microsystems in the biomedical field.- Some introductory notes on cell biology.- Some introductory notes on cell mechanics and mechanobiology.- Some introductory notes on engineering resources for interacting with cells.- II. Design and Manufacturing Strategies.- Overview of design and manufacturing strategies for biomedical microsystems.- Biomimetic computer-aided design: Addressing the complexity of biomaterials.- Multi-scale and multi-physics/chemistry modeling in biomedical microsystems.- Rapid prototyping of biomedical microsystems for interacting at a cellular level.- Nanomanufacturing for biomedical microsystems interacting at a molecular scale.- Characterization technologies for biomedical microsystems interacting with cells.- Issues linked to the mass-production of biomedical microsystems.- Part III Applications.- Overview of applications based on microsystems capable of interacting with cells.- Microfluidic devices for in vitro drug screening and detection.- Microfluidic devices for enhanced disease diagnosis and modeling.- Cell-based sensors and related microsystems.- Cell-based actuators and related microsystems.- Microsystems for the study of cells subject to gradients of chemicals.- Electrophoretic microsystems for studying cell mechanics.- Microtextured and microstructured biodevices for studying cell adhesion and dynamics.- Microtextured and.- microstructured cell culture matrixes for controlling cell behavior.- Resonant microsystems for controlling cell growth and differentiation.- Microtextured and microstructured prostheses for enhanced biocompatibility.- Microsystems for the study of cell interactions within physiological structures.- Biomimetic microsystems inspired in complete organs and their structures.- Part IV Present Challenges and Future Proposals.- Towards reliable organs-on-chips and humans-on-chips.- Towards reliable biomanufacturing technologies.- Towards a systematic methodology for the development of biomedical microdevices.- Project-based learning in the field of biomedical microdevices.
Автор: Dнaz Lantada Andrйs Название: Microsystems for Enhanced Control of Cell Behavior: Fundamentals, Design and Manufacturing Strategies, Applications and Challenges ISBN: 3319805436 ISBN-13(EAN): 9783319805436 Издательство: Springer Рейтинг: Цена: 139750.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Part I Fundamentals.- Introduction to microsystems in the biomedical field.- Some introductory notes on cell biology.- Some introductory notes on cell mechanics and mechanobiology.- Some introductory notes on engineering resources for interacting with cells.- II. Design and Manufacturing Strategies.- Overview of design and manufacturing strategies for biomedical microsystems.- Biomimetic computer-aided design: Addressing the complexity of biomaterials.- Multi-scale and multi-physics/chemistry modeling in biomedical microsystems.- Rapid prototyping of biomedical microsystems for interacting at a cellular level.- Nanomanufacturing for biomedical microsystems interacting at a molecular scale.- Characterization technologies for biomedical microsystems interacting with cells.- Issues linked to the mass-production of biomedical microsystems.- Part III Applications.- Overview of applications based on microsystems capable of interacting with cells.- Microfluidic devices for in vitro drug screening and detection.- Microfluidic devices for enhanced disease diagnosis and modeling.- Cell-based sensors and related microsystems.- Cell-based actuators and related microsystems.- Microsystems for the study of cells subject to gradients of chemicals.- Electrophoretic microsystems for studying cell mechanics.- Microtextured and microstructured biodevices for studying cell adhesion and dynamics.- Microtextured and.- microstructured cell culture matrixes for controlling cell behavior.- Resonant microsystems for controlling cell growth and differentiation.- Microtextured and microstructured prostheses for enhanced biocompatibility.- Microsystems for the study of cell interactions within physiological structures.- Biomimetic microsystems inspired in complete organs and their structures.- Part IV Present Challenges and Future Proposals.- Towards reliable organs-on-chips and humans-on-chips.- Towards reliable biomanufacturing technologies.- Towards a systematic methodology for the development of biomedical microdevices.- Project-based learning in the field of biomedical microdevices.
Автор: Orzen Michael A Название: The Lean IT Field Guide ISBN: 1498730388 ISBN-13(EAN): 9781498730389 Издательство: Taylor&Francis Рейтинг: Цена: 48990.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: How many IT books have you read that are long on theory and short on practical application? They are interesting, but not very impactful. They provide a framework from which to think and understand, but lack a process from which to act. Addressing this urgent need for the IT community, The Lean IT Field Guide explains how to initiate, execute, and sustain a lean IT transformation.Illuminating a clear path to lean IT, the authors integrate more than two decades of combined experience to provide you with a proven method for creating and sustaining a true lean IT workplace. This field guide not only highlights the organizational techniques of more agile and lean processes, but also the leadership work required to help management adopt these new approaches.Based on proven methods from different industries, including banking, manufacturing, insurance, food and beverage, and logistics, the book details a clear model that covers all the components you need to achieve and sustain a favorable work environment and culture in support of lean IT.Filled with anecdotes and case studies from actual businesses, the book includes pictures, templates, and examples that illustrate the application of the lean methods discussed.
This book is focused on the expansive and highly demanding subject of Food Industry "Technical & Quality Management." As the world's most vital industry "Food Production" is complex, multifaceted and continuously scrutinised. Food scares and product recalls, on national and international scales, demonstrate the persistent challenge to identify, monitor and control all hazards, and also address the increasing criminal threats of Food Fraud, Adulteration & Intentional Contamination.
With the benefit of unique perspectives gained by working across Quality, Technical and Operations Management roles at all levels within the food industry, Swainson's Handbook of Technical and Quality Management considers the very diverse remits and particular challenges of those working to assure product Quality, Safety and Legality in the sector.
This book provides insights and guidance on the "Applied Practice" of Industrial Quality and Technical Management, written from the perspective of the industry practitioner. "Knowing what to do is half of the challenge, but being able to then make it happen is crucial" - a fact which is often less well considered in food sector information resources.
Split into two sections, the book first reviews generic aspects of Food Quality and Technical Management activities with particular regard to: Food Sector Challenges and the Role of Technical and Quality Management; Defining Technical and Quality Standards; The Food Safety and Quality Management System; Raw Materials and Packaging Supplier Control; Site Standards; Product Control and HACCP Considerations; Operations and Process Control; Personnel Control; Audits; Non-Conformance, Recall & Crisis Management; Managing the Technical Department.
In the second part of the book Guest Authors share their expertise on a range of specialist topics, providing significant breadth and depth to the content which includes: Review of Third party audit schemes; Insights into supplying supermarkets with regard to good technical and quality management practices; Enforcement authority perspectives on the food manufacturing sector. Also covered are the specific sector challenges of food quality and safety assurance in Fruit and vegetables; Herbs and spices, Cereals, Baked products, Canning and "Cook - Chill" Ready Meals, Soups and Sauces.
Compiled expertise of food sector specialists with extensive industrial experience.
Edited by an industry and academic expert with over 25 years experience of technical and quality management in the food sector.
Contains Technical and Quality Management information that is relevant to a wide range of sectors in the food industry.
Also examines Technical and Quality Management practice in specific food applications and reviews relevant compliance standards.
Автор: Ortiz, Chris A. Название: The TPM Playbook ISBN: 1138437948 ISBN-13(EAN): 9781138437944 Издательство: Taylor&Francis Рейтинг: Цена: 163330.00 T Наличие на складе: Нет в наличии. Описание: This book is a guideline for implementation and it is intended for the Lean practitioner looking for a training tool and a guideline that can be used in the work area while improvements are being conducted. It describes how to effectively implement total productive maintenance.
Автор: Ortiz, Chris A. Название: The Quick Changeover Playbook ISBN: 1138437956 ISBN-13(EAN): 9781138437951 Издательство: Taylor&Francis Рейтинг: Цена: 163330.00 T Наличие на складе: Невозможна поставка. Описание: This book covers the basics of setup reduction and quick changeover and data collection. It outlines the first pass of waste reduction through the implementation of the visual workplace and layout improvements. The book covers two quick changeover concepts: intermediate tooling and one-turn methods.
Автор: Sharma, Sanjay Название: Manufacturing inventory and supply analysis ISBN: 1032081708 ISBN-13(EAN): 9781032081700 Издательство: Taylor&Francis Рейтинг: Цена: 90840.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This reference text discusses models and analyzes cases that are useful for material requirements planning (MRP), just-in-time (JIT) environments and supply chain environments, as well as traditional production-inventory systems.It covers important concepts, including production-inventory systems, optimal purchase quantity, optimal production quantity, instantaneous procurement, multiple input items, sensitivity analysis, multiproduct manufacturing, determination of optimum cycle time, fractional backlogging, and incorporating input item procurement and flexibility in the production rate.Aimed at senior undergraduate and graduate students, and professionals in the field of industrial engineering, production engineering and manufacturing science, this text:Provides detailed models/analysis pertaining to various cases which are useful for material requirements planning and supply chain environmentsElaborates manufacturing rate flexibility, demand variation and production rate variationDiscusses the multi-item manufacturing environment and presents models with backorders, as well as fractional backloggingAnalyzes flexible production rates, along with upward and downward variations
Автор: Duckworth Название: A Six Sigma Approach To Sustainabil ISBN: 1498720854 ISBN-13(EAN): 9781498720854 Издательство: Taylor&Francis Рейтинг: Цена: 93910.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: In an age when most business plans extend only to the next quarterly reporting period, the authors of this book propose an audaciously longer view of future planning. Reaching beyond the modern five or ten-year strategic plan, the authors take a cue from Kongo Gumi, a Japanese construction company launched in 578 AD that managed to thrive as a family-owned business for nearly 1500 years. With the 2010 publication of an international standard on social responsibility (ISO 26000), and increased attention to sustainability and sustainability reporting, many organizations today are heeding the call to operate with this standard in mind. However, once the guidelines are understood and the gaps measured, these same organizations often struggle during implementation. Leveraging many decades of combined experience in Quality Management and Product Development, the authors of this seminal book provide a proven solution to help you turn information into action. Defining exactly what social responsibility means, A Six Sigma Approach to Sustainability introduces SOFAIR, a six-step methodology for achieving sustainability through social responsibility performance improvement. This rigorous methodology uses Six Sigma, and other process improvement methods, as a basis for maximizing the efficiency and effectiveness of your organization's social responsibility performance improvement effort. The book explains and demonstrates the meaning of CISR® - continual improvement for social responsibility - and illustrates the six-step SOFAIR methodology with many examples. The authors explain how your existing organizational continual improvement efforts can be adapted to also focus on sustainability. Four case studies are provided that demonstrate the application of the methodology in manufacturing, healthcare, business processes, and everyday personal life. Finally, the authors provide 10 things you can do today as social responsibility action.Kongo Gumi represents the author’s goal of sustainability, and prompts the question, "What will your organization look like, not in 5-10 years, but in fifteen centuries?" This book provides a way for you to take action to create a more sustainable environment where your customers, suppliers, employees, and communities are available for your organization for decades, and even centuries, to come.About the Book's Cover: The six hands of many colors encircling the globe represent the diversity of stakeholders engaged in the six-step SOFAIR Process, and the global impact of CISR®.CISR® is a registered trademark and can be used with permission for non-commercial use. Contact: www.SherpaBCorp.com
Автор: V.K. Jain Название: Micromanufacturing Processes ISBN: 1138076422 ISBN-13(EAN): 9781138076426 Издательство: Taylor&Francis Рейтинг: Цена: 64300.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание:
Increased demand for and developments in micromanufacturing have created a need for a resource that covers both the science and technology of this rapidly growing area. With contributions from eminent professors and researchers actively engaged in teaching, research, and development, Micromanufacturing Processes details the basic principles, tools, techniques, and latest advances in micromanufacturing processes. It includes coverage of measurement techniques and research trends as well as a large number of cross-references, making it useful to the students and researchers alike.
The book outlines the challenges faced not only in micromanufacturing but also in meso- and nanomanufacturing, exploring topics such as micromachining, micro welding, microforming, micromolding, nanofinishing and micro-/nano-metrology. It includes examples that demonstrate the capabilities of fabricating micro- / nano-products and micro- / nano-features on the macro and micro products. The text also discusses nanofinishing techniques giving surface finish in the domain of sub-nano level, micro welding techniques, namely, laser beam micro welding, electron beam micro welding, micro / nano patterning in large quantities, and micro / nano metrology principles and equipments. It goes on to describe devices such as nano spring, micro mixer, micro cantilever, to name just a few.
Unique in its level of coverage, the book highlights new challenges in manufacturing and covers several different types of micromanufacturing processes, such as micromachining, microforming, microcasting, microjoining, nanofinishing, and micrometrology. The level of details, extensive references, figures, and diagrams make the book a reference that will become the standard for this field.
Автор: Ortiz, Chris A. Название: The 5S Playbook ISBN: 1138437999 ISBN-13(EAN): 9781138437999 Издательство: Taylor&Francis Рейтинг: Цена: 183750.00 T Наличие на складе: Нет в наличии. Описание: This book provides detailed step-by-step guidelines on how to properly implement 5S (Sort, Set in Order, Scrub, Standardize, Sustain) and the visual workplace. It is ideal for Lean practitioners and facilitators looking for a training tool and a guideline that can be used in the work area.
Автор: Ortiz, Chris A. Название: The Kanban Playbook ISBN: 1138437921 ISBN-13(EAN): 9781138437920 Издательство: Taylor&Francis Рейтинг: Цена: 153120.00 T Наличие на складе: Невозможна поставка. Описание: This book is intented for Lean practitioners and facilitators looking for a training tool and guideline that can be used in the work area while improvements are being made. It provides the most visible and detailed approach to Kanban implementation, so that they can see results in a short period.
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
