Numerical Modeling of AAR, Saouma, Victor

Автор: Christian Studer
Название: Numerics of Unilateral Contacts and Friction
ISBN: 3642101690 ISBN-13(EAN): 9783642101694
Издательство: Springer
Рейтинг:
Цена: 113180.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book covers the numerical simulation of mechanical systems with unilateral contacts and friction. It gives an excellent overview on well established methods in non-smooth mechanics and opens new perspectives for development in this promising field.

Автор: Saouma, Victor
Название: Numerical Modeling of AAR
ISBN: 0415636973 ISBN-13(EAN): 9780415636971
Издательство: Taylor&Francis
Рейтинг:
Цена: 209270.00 T
Наличие на складе: Нет в наличии.

Название: Handbook of optoelectronic device modeling and simulation
ISBN: 0367781808 ISBN-13(EAN): 9780367781804
Издательство: Taylor&Francis
Рейтинг:
Цена: 45930.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Optoelectronic devices utilize semiconductor structures that enable the interaction and propagation of electrons and photons, and are the foundation of a huge range of devices. This handbook provides an overview of modeling and simulation for optoelectronic device design, analysis, and performance optimization.

Автор: Isabel Fernandes; Maria dos Anjos Ribeiro; Maarten
Название: Petrographic Atlas: Characterisation of Aggregates Regarding Potential Reactivity to Alkalis
ISBN: 9401773823 ISBN-13(EAN): 9789401773829
Издательство: Springer
Рейтинг:
Цена: 130430.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Thus, rock types are classified as igneous, sedimentary or metamorphic based upon mineral content, microstructure and texture/fabric.* in addition, the atlas identifies known alkali-reactive silica types in each rock type presented.

Автор: Tom Schanz
Название: Unsaturated Soils: Experimental Studies
ISBN: 364242533X ISBN-13(EAN): 9783642425332
Издательство: Springer
Рейтинг:
Цена: 409010.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: These proceedings document the various papers delivered and partially presented at the International Conference "From experimental evidence towards numerical modeling of unsaturated soils," which was held in Weimar (Germany) during 18-19 September 2003. The conference was organized under the auspices of the International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE) and the National German G- technical Society (DGGT). The need to understand the behavior of unsaturated soils is becoming exclusively - sential for the geotechnical engineers and designers. In the last three decades many - searchers have made significant contribution to the understanding of the unsaturated soil mechanics. Nevertheless, application of the subject to variety of new problems still - quires our attention. This International conference is a mere attempt to unite researchers and engineers in geotechnical engineering and to discuss about the problems associated with the unsaturated soils. Doing so the objectives of these lecture notes are as follows: - to promote unsaturated soil mechanics for practical application, - to exchange experiences in experimental unsaturated soil mechanics and numerical modeling, - to discuss application of unsaturated soil mechanics to variety of problems. In other words, we could also name these two volumes as "From theory to daily pr- tice." I would like to extend my deep sense of appreciation as the editor and the Head of the organizing committee, to many persons who have contributed either directly or indirectly to organize the International conference and to finalize these proceedings.

Автор: Tom Schanz
Название: Unsaturated Soils: Numerical and Theoretical Approaches
ISBN: 3642425798 ISBN-13(EAN): 9783642425790
Издательство: Springer
Рейтинг:
Цена: 315850.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: These proceedings document the various papers delivered and partially presented at the International Conference "From experimental evidence towards numerical modeling of unsaturated soils," which was held in Weimar (Germany) during 18-19 September 2003. The conference was organized under the auspices of the International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE) and the National German G- technical Society (DGGT). The need to understand the behavior of unsaturated soils is becoming exclusively - sential for the geotechnical engineers and designers. In the last three decades many - searchers have made significant contribution to the understanding of the unsaturated soil mechanics. Nevertheless, application of the subject to variety of new problems still - quires our attention. This International conference is a mere attempt to unite researchers and engineers in geotechnical engineering and to discuss about the problems associated with the unsaturated soils. Doing so the objectives of these lecture notes are as follows: - to promote unsaturated soil mechanics for practical application, - to exchange experiences in experimental unsaturated soil mechanics and numerical modeling, - to discuss application of unsaturated soil mechanics to variety of problems. In other words, we could also name these two volumes as "From theory to daily pr- tice." I would like to extend my deep sense of appreciation as the editor and the Head of the organizing committee, to many persons who have contributed either directly or indirectly to organize the International conference and to finalize these proceedings.

Автор: Pierre Deymier; Keith Runge; Krishna Muralidharan
Название: Multiscale Paradigms in Integrated Computational Materials Science and Engineering
ISBN: 3319245279 ISBN-13(EAN): 9783319245270
Издательство: Springer
Рейтинг:
Цена: 121890.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents cutting-edge concepts, paradigms, and research highlights in the field of computational materials science and engineering, and provides a fresh, up-to-date perspective on solving present and future materials challenges.

Автор: Bruno Godart; Mario de Rooij; Jonathan G.M. Wood
Название: Guide to Diagnosis and Appraisal of AAR Damage to Concrete in Structures
ISBN: 9400796269 ISBN-13(EAN): 9789400796263
Издательство: Springer
Рейтинг:
Цена: 113180.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book describes procedures and methods for obtaining a diagnosis of concrete damage caused by Alkali-Aggregate Reaction (AAR). Covers field inspection, sampling, petrographic examination of core samples and supplementary tests and analyses on cores.

Автор: N. Ida
Название: Numerical Modeling for Electromagnetic Non-Destructive Evaluation
ISBN: 0412468301 ISBN-13(EAN): 9780412468308
Издательство: Springer
Рейтинг:
Цена: 243800.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This text on numerical methods applied to the analysis of electromagnetic nondestructive testing (NOT) phenomena is the first in a series devoted to all aspects of engineering nondestructive evaluation.

Автор: Nicola Bonora; Eric Brown
Название: Numerical Modeling of Materials Under Extreme Conditions
ISBN: 3662507617 ISBN-13(EAN): 9783662507612
Издательство: Springer
Рейтинг:
Цена: 104480.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book presents twelve state of the art contributions in the field of numerical modeling of materials subjected to large strain, high strain rates, large pressure and high stress triaxialities, organized into two sections.

Автор: Nicola Bonora; Eric Brown
Название: Numerical Modeling of Materials Under Extreme Conditions
ISBN: 3642542573 ISBN-13(EAN): 9783642542572
Издательство: Springer
Рейтинг:
Цена: 130610.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book presents twelve state of the art contributions in the field of numerical modeling of materials subjected to large strain, high strain rates, large pressure and high stress triaxialities, organized into two sections.

Автор: Michel Rappaz; Michel Bellet; Michel Deville; Ray
Название: Numerical Modeling in Materials Science and Engineering
ISBN: 3642118208 ISBN-13(EAN): 9783642118203
Издательство: Springer
Рейтинг:
Цена: 113190.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book introduces the concepts and methodologies related to the modelling of complex phenomena occurring in materials processing, developing finite differences, finite volumes and finite elements through phase transformation, solid mechanics and fluid flow.