Additive and Subtractive Manufacturing: Emergent Technologies, J. Paulo Davim
Название: Compendium of Food Additive Specifications: Joint FAO/WHO Expert Committee on Food Additives (JECFA), 82nd meeting 2016 ISBN: 9251094942 ISBN-13(EAN): 9789251094945 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 55440.00 T Наличие на складе: Невозможна поставка. Описание: Contains food additive specification monographs, analytical methods, and other information prepared at the eighty-second meeting. The specification monographs provide information on the identity and purity of food additives used directly in foods or in food production.
Автор: Joint Fao/who Expert Committee On Food Additives Food And Agriculture Organization Council Of The Food & Agriculture Organization World Health Organiz Название: Compendium of food additive specifications (fao jecfa monographs) ISBN: 9251060657 ISBN-13(EAN): 9789251060650 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 28430.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Provides information on the identity and purity of food additives used directly in foods or in food production. The main objectives are to identify the food additives that have been subjected to testing for safety, to ensure that additives are of the quality required for use in food, and to encourage good manufacturing practice.
Автор: Dongdong Gu Название: Laser Additive Manufacturing of High-Performance Materials ISBN: 3662523388 ISBN-13(EAN): 9783662523384 Издательство: Springer Рейтинг: Цена: 113180.00 T Наличие на складе: Невозможна поставка. Описание:
This book entitled "Laser Additive Manufacturing of High-Performance Materials" covers the specific aspects of laser additive manufacturing of high-performance new materials components based on an unconventional materials incremental manufacturing philosophy, in terms of materials design and preparation, process control and optimization and theories of physical and chemical metallurgy. This book describes the capabilities and characteristics of the development of new metallic materials components by laser additive manufacturing process, including nanostructured materials, in situ composite materials, particle reinforced metal matrix composites, etc. The topics presented in this book, similar as laser additive manufacturing technology itself, show a significant interdisciplinary feature, integrating laser technology, materials science, metallurgical engineering and mechanical engineering. This is a book for researchers, students, practicing engineers and manufacturing industry professionals interested in laser additive manufacturing and laser materials processing. Dongdong Gu is a Professor at College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics (NUAA), PR China.
Автор: Milewski, John O. Название: Additive manufacturing of metals ISBN: 3319582046 ISBN-13(EAN): 9783319582047 Издательство: Springer Рейтинг: Цена: 79190.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание:
This engaging volume presents the exciting new technology of additive manufacturing (AM) of metal objects for a broad audience of academic and industry researchers, manufacturing professionals, undergraduate and graduate students, hobbyists, and artists. Innovative applications ranging from rocket nozzles to custom jewelry to medical implants illustrate a new world of freedom in design and fabrication, creating objects otherwise not possible by conventional means.
The author describes the various methods and advanced metals used to create high value components, enabling readers to choose which process is best for them. Of particular interest is how harnessing the power of lasers, electron beams, and electric arcs, as directed by advanced computer models, robots, and 3D printing systems, can create otherwise unattainable objects.
A timeline depicting the evolution of metalworking, accelerated by the computer and information age, ties AM metal technology to the rapid evolution of global technology trends. Charts, diagrams, and illustrations complement the text to describe the diverse set of technologies brought together in the AM processing of metal. Extensive listing of terms, definitions, and acronyms provides the reader with a quick reference guide to the language of AM metal processing. The book directs the reader to a wealth of internet sites providing further reading and resources, such as vendors and service providers, to jump start those interested in taking the first steps to establishing AM metal capability on whatever scale. The appendix provides hands-on example exercises for those ready to engage in experiential self-directed learning.
Название: Laser-Based Additive Manufacturing ISBN: 1498739989 ISBN-13(EAN): 9781498739986 Издательство: Taylor&Francis Рейтинг: Цена: 93910.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book is a comprehensive look at new technologies in LBAM of metal parts, covering topics such as mechanical properties, microstructural features, thermal behavior and solidification, process parameters, optimization and control, uncertainty quantification, and more.
Автор: Lillian White Название: Additive Manufacturing Materials: Standards, Testing & Applicability ISBN: 1634833023 ISBN-13(EAN): 9781634833028 Издательство: Nova Science Рейтинг: Цена: 121430.00 T Наличие на складе: Невозможна поставка. Описание: This book is the first step in a process to develop standards appropriate for the testing of the mechanical properties of metal parts made via additive manufacturing. This book investigates the current state-of-the-art methods for determining the properties of metal powders. This assessment evaluates both existing standards that provide guidance for powder property measurement methods, as well as technical publications describing methods that are not covered as completely by standards. Furthermore, the analysis shows that additive manufacturing-specific materials standards for characterising the properties of metal powders and metal parts do not have to be developed from scratch. Decades of powder property testing (born out of powder metallurgy processes) and mechanical property testing has resulted in a suite of existing standards that can form the basis needed for some additive manufacturing materials.
Автор: Kaushik Kumar, Divya Zindani, J. Paulo Davim Название: Additive Manufacturing Technologies From an Optimization Perspective ISBN: 1522591672 ISBN-13(EAN): 9781522591672 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 200510.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: In this technology-driven era, conventional manufacturing is increasingly at risk of reaching its limit, and a more design-driven manufacturing process, additive manufacturing, might just hold the key to innovation. Offering a higher degree of design freedom, the optimization and integration of functional features, and the manufacturing of small batch sizes, additive manufacturing is changing industry as we know it. Additive Manufacturing Technologies From an Optimization Perspective is a critical reference source that provides a unified platform for the dissemination of basic and applied knowledge about additive manufacturing. It carefully examines how additive manufacturing is increasingly being used in series production, giving those in the most varied sectors of industry the opportunity to create a distinctive profile for themselves based on new customer benefits, cost-saving potential, and the ability to meet sustainability goals. Highlighting topics such as bio-printing, tensile strength, and cell printing, this book is ideally designed for academicians, students, engineers, scientists, software developers, architects, entrepreneurs, and medical professionals interested in advancements in next-generation manufacturing.
Автор: Kaushik Kumar, Divya Zindani, J. Paulo Davim Название: Additive Manufacturing Technologies From an Optimization Perspective ISBN: 1522591680 ISBN-13(EAN): 9781522591689 Издательство: Mare Nostrum (Eurospan) Цена: 151530.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: In this technology-driven era, conventional manufacturing is increasingly at risk of reaching its limit, and a more design-driven manufacturing process, additive manufacturing, might just hold the key to innovation. Offering a higher degree of design freedom, the optimization and integration of functional features, and the manufacturing of small batch sizes, additive manufacturing is changing industry as we know it. Additive Manufacturing Technologies From an Optimization Perspective is a critical reference source that provides a unified platform for the dissemination of basic and applied knowledge about additive manufacturing. It carefully examines how additive manufacturing is increasingly being used in series production, giving those in the most varied sectors of industry the opportunity to create a distinctive profile for themselves based on new customer benefits, cost-saving potential, and the ability to meet sustainability goals. Highlighting topics such as bio-printing, tensile strength, and cell printing, this book is ideally designed for academicians, students, engineers, scientists, software developers, architects, entrepreneurs, and medical professionals interested in advancements in next-generation manufacturing.
This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada:
Additive Manufacturing Technologies
Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications
Multifunctional Coatings for Energy and Environmental Applications
Novel, Green, and Strategic Processing and Manufacturing Technologies
Powder Processing Technology for Advanced Ceramics
Computational Design and Modeling
Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)
Автор: Kumar Название: 3D Printing and Additive Manufacturing Technologies ISBN: 9811303045 ISBN-13(EAN): 9789811303043 Издательство: Springer Рейтинг: Цена: 149060.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book presents a selection of papers on advanced technologies for 3D printing and additive manufacturing, and demonstrates how these technologies have changed the face of direct, digital technologies for the rapid production of models, prototypes and patterns.
Автор: Xu Guo; Gengdong Cheng; Wing-Kam Liu Название: Report of the Workshop Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing (WAM 2016) ISBN: 3319636693 ISBN-13(EAN): 9783319636696 Издательство: Springer Рейтинг: Цена: 51230.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: The volume focuses on theoretical and computational approaches and involves areas such as simulation-based engineering and science, integrated computational materials engineering, mechanics, material science, manufacturing processes, and other specialized areas.
Автор: Mirko Meboldt; Christoph Klahn Название: Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017 ISBN: 331966865X ISBN-13(EAN): 9783319668659 Издательство: Springer Рейтинг: Цена: 214280.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: These proceedings exchange ideas and knowledge among engineers, designers and managers on how to support real-world value chains by developing additive manufactured series products. The papers from the conference show a holistic, multidisciplinary view.
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
