Micro-electrical Discharge Machining Processes, Golam Kibria; Muhammad P. Jahan; B. Bhattacharyya

Название: Nontraditional Machining Processes
ISBN: 144715178X ISBN-13(EAN): 9781447151784
Издательство: Springer
Рейтинг:
Цена: 148020.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book explores techniques and processes that aim to achieve high accuracies and good surface finishes, parts machined without burrs or residual stresses especially with materials that cannot be machined by conventional methods.

Автор: Sumit Bhowmik; Divya Zindani
Название: Hybrid Micro-Machining Processes
ISBN: 303013038X ISBN-13(EAN): 9783030130381
Издательство: Springer
Рейтинг:
Цена: 46570.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents some of the recent hybrid micro-machining processes used to manufacture miniaturized products with micro level precision. The current developed technologies to manufacture the micro dimensioned products while meeting the desired precision level are described within the text. The authors especially highlight research that focuses on the development of new micro machining platforms while integrating the different technologies to manufacture the micro components in a high throughput and cost effective manner.

Автор: Kumar
Название: Advanced Machining and Manufacturing Processes
ISBN: 3319760742 ISBN-13(EAN): 9783319760742
Издательство: Springer
Рейтинг:
Цена: 93160.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book covers the various advanced manufacturing processes employed by manufacturing industries to improve their productivity in terms of socio-economic development.The authors present automated conventional and non-conventional machining techniques as well as virtual machining principles and techniques. Material removal by mechanical, chemical, thermal and electrochemical processes are described in detail. A glossary of key concepts is attached at end of the book.

Автор: Golam Kibria, Vijaysingh U. Rathod
Название: Introduction to Advanced Machining and Finishing Processes
ISBN: 1783324988 ISBN-13(EAN): 9781783324989
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 69300.00 T
Наличие на складе: Невозможна поставка.
Описание: Focuses on applications of non-conventional machining processes for advanced machining as well as advanced surface finishing. The study of non-conventional machining processes mainly includes working principles, material removal mechanisms, system details, process parameters and their influence on performance, process capabilities, advantages, limitations, and applications etc. Applications of non-conventional machining processes to achieve micro and nano level finishing on various product surfaces highlights working principles, material removal mechanisms, system details, process parameters and their influence on performance advantages, limitations, and applications of these process in various fields. This book will be invaluable to engineering postgraduate and undergraduate students, practising engineers, and researchers in manufacturing or production discipline.

Автор: D Biermann; F Hollmann
Название: Thermal Effects in Complex Machining Processes
ISBN: 3319571192 ISBN-13(EAN): 9783319571195
Издательство: Springer
Рейтинг:
Цена: 139750.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This contributed volume contains the research results of the priority programme (PP) 1480 “Modelling, Simulation and Compensation of Thermal Effects for Complex Machining Processes', funded by the German Research Society (DFG). The topical focus of this programme is the simulation-based prediction and compensation of thermally induced workpiece deviations and subsurface damage effects. The approach to the topic is genuinely interdisciplinary, covering all relevant machining operations such as turning, milling, drilling and grinding. The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students.

Автор: Sidpara, Ajay M. Malayath, Ganesh
Название: Micro electro discharge machining
ISBN: 113861307X ISBN-13(EAN): 9781138613072
Издательство: Taylor&Francis
Рейтинг:
Цена: 148010.00 T
Наличие на складе: Нет в наличии.
Описание: Micro Electro Discharge Machining (EDM), is a machining method used to produce MEMS components, drill holes for fuel injectors, fabrication of biomedical devices, and dies, or for casting microstructures. The book can be used as a guide to select electrode materials, dielectric fluids, and machining conditions according to output requirements.

Название: Advanced Machining Processes
ISBN: 0367885980 ISBN-13(EAN): 9780367885984
Издательство: Taylor&Francis
Рейтинг:
Цена: 48990.00 T
Наличие на складе: Невозможна поставка.
Описание: Modeling and machining are two terms closely related. The benefits of the application of modeling on machining are well known. The advances in technology call for the use of more sophisticated machining methods for the production of high-end components.

Автор: Kaushik Kumar; Divya Zindani; J. Paulo Davim
Название: Advanced Machining and Manufacturing Processes
ISBN: 3030093964 ISBN-13(EAN): 9783030093969
Издательство: Springer
Рейтинг:
Цена: 83850.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book covers the various advanced manufacturing processes employed by manufacturing industries to improve their productivity in terms of socio-economic development.The authors present automated conventional and non-conventional machining techniques as well as virtual machining principles and techniques. Material removal by mechanical, chemical, thermal and electrochemical processes are described in detail. A glossary of key concepts is attached at end of the book.

Автор: Prakash Mahadeo Dixit; U.S. Dixit
Название: Modeling of Metal Forming and Machining Processes
ISBN: 1849967490 ISBN-13(EAN): 9781849967495
Издательство: Springer
Рейтинг:
Цена: 200260.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Written by authorities in the subject, this book provides a complete treatment of metal forming and machining by using the computational techniques FEM, fuzzy set theory and neural networks as modelling tools.

Автор: D Biermann; F Hollmann
Название: Thermal Effects in Complex Machining Processes
ISBN: 331986081X ISBN-13(EAN): 9783319860817
Издательство: Springer
Рейтинг:
Цена: 139750.00 T
Наличие на складе: Поставка под заказ.
Описание: This contributed volume contains the research results of the priority programme (PP) 1480 “Modelling, Simulation and Compensation of Thermal Effects for Complex Machining Processes', funded by the German Research Society (DFG). The topical focus of this programme is the simulation-based prediction and compensation of thermally induced workpiece deviations and subsurface damage effects. The approach to the topic is genuinely interdisciplinary, covering all relevant machining operations such as turning, milling, drilling and grinding. The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students.

Автор: J. Paulo Davim
Название: Traditional Machining Processes
ISBN: 3662523817 ISBN-13(EAN): 9783662523810
Издательство: Springer
Рейтинг:
Цена: 95770.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Chapter 2 is dedicated to the analysis of orthogonal cutting experiments using diamond-coated tools with force and temperature measurements. Finally, chapter 7 is dedicated to flexible integration of shape and functional modelling of machine tool spindles in a design framework.

Автор: J. Paulo Davim
Название: Traditional Machining Processes
ISBN: 3662450879 ISBN-13(EAN): 9783662450871
Издательство: Springer
Рейтинг:
Цена: 130610.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Chapter 2 is dedicated to the analysis of orthogonal cutting experiments using diamond-coated tools with force and temperature measurements. Finally, chapter 7 is dedicated to flexible integration of shape and functional modelling of machine tool spindles in a design framework.