Mechanics of Biological Systems & Micro-And Nanomechanics, Volume 4: Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics, Grady Martha, Minary Majid, Starman La Vern
Автор: Martha E. Grady Название: Mechanics of Biological Systems and Materials & Micro-and Nanomechanics, Volume 4 ISBN: 3030300129 ISBN-13(EAN): 9783030300128 Издательство: Springer Рейтинг: Цена: 139750.00 T Наличие на складе: Поставка под заказ. Описание: Mechanics of Biological Systems and Materials & Micro-and Nanomechanics, Volume 4 of the Proceedings of the 2019 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of six from the Conference, brings together contributions to important areas of research and engineering. The collection presents early findings and case studies on a wide range of topics, including:
Extreme Nanomechanics
In-Situ Nanomechanics
Expanding Boundaries in Metrology
Micro and Nanoscale Deformation
MEMS for Actuation, Sensing and Characterization
1D & 2D Materials
Cardiac Mechanics
Cell Mechanics
Biofilms and Microbe Mechanics
Traumatic Brain Injury
Orthopedic Biomechanics
Ligaments and Soft Materials
Автор: Arzoumanidis Alex, Silberstein Meredith, Amirkhizi Alireza Название: Challenges in Mechanics of Time-Dependent Materials, Volume 2: Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics ISBN: 303006963X ISBN-13(EAN): 9783030069636 Издательство: Springer Рейтинг: Цена: 139750.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2018 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length ScalesExtreme Environments & Environmental EffectsSoft MaterialsDamage, fatigue and FractureInhomogeneities & InterfacesViscoelasticityResearch in Progress
Influence of Sample Preparation on Determined Nanomechanical Properties of Metastable Calcium Carbonate Polymorphs.- Crystallization and Dissolution of Common Salts - Damage Potential to Porous Media.- Torsional shear testing of mortar.- Comparative tests of strengthening effects on weak mortars consolidated with various agents.- Novel Device for 4-point Flexural Testing of Quasi-brittle Materials during 4D Computed Tomography.- Effects of Long-term Aging on the Low-cycle Fatigue Behavior of Inconel 718 superalloy.- Enhanced Young's modulus in percolative cementitious composites reinforced with carbon nanotubes.- Behavior of Partially and Fully FRP-Confined Circularized Square Columns (CSCs) under Axial Compression.- Stress-Strain Behavior of Circular Concrete Columns Partially Wrapped with FRP Strips.- Improving the Tribological Properties of Ti6Al4V Alloy with Multi-Walled Carbon Nanotube Additions.
Автор: Emmanuel E. Gdoutos Название: Proceedings of the Second International Conference on Theoretical, Applied and Experimental Mechanics ISBN: 3030218937 ISBN-13(EAN): 9783030218935 Издательство: Springer Рейтинг: Цена: 186330.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This is the proceedings of the 2nd International Conference on Theoretical, Applied and Experimental Mechanics that was held in Corfu, Greece, June 23-26, 2019.It presents papers focusing on all aspects of theoretical, applied and experimental mechanics, including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation.The papers update the latest research in their field, carried out since the last conference in 2018. This book is suitable for engineers, students and researchers who want to obtain an up-to-date view of the recent advances in the area of mechanics.
Автор: Emmanuel E. Gdoutos Название: Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics ISBN: 3030063437 ISBN-13(EAN): 9783030063436 Издательство: Springer Рейтинг: Цена: 139750.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: ICTAEM_1 treated all aspects of theoretical, applied and experimental mechanics including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation. During the conference special symposia covering major areas of research activity organized by members of the Scientific Advisory Board took place. ICTAEM_1 brought together the most outstanding world leaders and gave attendees the opportunity to get acquainted with the latest developments in the area of mechanics. ICTAEM_1 is a forum of university, industry and government interaction and serves in the exchange of ideas in an area of utmost scientific and technological importance.
Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics, Volume 4 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of nine from the Conference, brings together contributions to important areas of research and engineering. The collection presents early findings and case studies on a wide range of topics, including:
Автор: Ivan A. Parinov Название: Proceedings of the 2018 International Conference on "Physics, Mechanics of New Materials and Their Applications " ISBN: 1536158623 ISBN-13(EAN): 9781536158625 Издательство: Nova Science Рейтинг: Цена: 215410.00 T Наличие на складе: Невозможна поставка. Описание: The developed original principles and approaches for advanced materials and composites (ferro-piezoelectrics, nanostructures, functional materials and polymeric structures etc.) defines the main achievements and directions of modern natural and technical sciences, technologies, techniques and industry. Direct improvement of the materials and devices characteristics are based on numerous chemical, physical and mechanical studies, modern numerical approaches and methods of mathematical modeling and physical experiment. These PHENMA 2018 proceedings are devoted to development and solution of different actual problems into framework of the above-mentioned scientific directions. The proposed book presents interesting original results in theoretical, computational and experimental methods, which allow manufacturing nano-materials and composites (for example, ferro-piezoelectrical and environmentally-friendly), and other materials in different scale levels with before given and improved properties. The materials could be obtained due to reprocessing natural materials, wasters, fruits and plants. These proceedings also discuss results of mathematical modeling and experimental studies of advanced devices (piezoelectric transducers, energy-harvesters, different sensors, medical devices etc.). The presented studies are based on the new generation nano-materials, ferro-piezoelectrics and other structure-sensitive materials with special properties. The book treats promising modern nano- and microstructure techniques for manufacture of different novel materials (for example, nanostructures) and devices, which are very important for educational purposes and industry, unification and development of various expertises, designs and analyzes. The book presents new results of internationally recognized scientific teams in different areas of materials science, condensed matter physics, physical and mechanical theory and experiment, processing techniques and engineering of advanced materials and composites, numerical methods and numerous applications. These results are devoted to R&D of advanced piezo-ferroelectrics, nanostructures, other promising materials and composites with specific properties, based on the developed processing techniques and modern approaches of chemistry, physics, mechanics and materials science, and also wide spectrum of applications including industry and marketing. The book presents a wide spectrum of results, obtained on the base of original mathematical models, physical experiments, computer modeling, and nano- and piezoelectric applications. This collection presents 50 selected reports of the 2018 International Conference on "Physics, Mechanics of New Materials and Their Applications" (PHENMA 2018, August 9-11, 2018, Busan, South Korea), http://phenma2018.math.sfedu.ru. The book is addressed to students, post-graduate students, scientists and engineers, investigating and developing a new generation of nano-materials and nano-composites, piezo-ferroelectrics, other advanced materials with structure-sensitive properties, and also different devices, manufactured on their base and used in numerous applications in various areas of science, technique and technology. The book presents new research methods and scientific results in the condensed matter physics, materials science, physical and mechanical experiment, processing techniques and engineering of nanomaterials, piezoelectrics and other advanced materials and composites, numerical methods, and also different applications and developed devices.
Автор: George C. Sih; S.R. Valluri Название: Proceedings of an international conference on Fracture Mechanics in Engineering Application ISBN: 9400995768 ISBN-13(EAN): 9789400995765 Издательство: Springer Рейтинг: Цена: 186330.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: "It is true that in recent times, science and tech- nology - and their practitioners - have been subjected to much public scrutiny, debate and severe criticism". On the other hand, the depletion of non-renewable resources, degradation of the natural environment and a host of other problems had been laid at the door of technology and science.
Автор: George C. Sih; S.R. Valluri Название: Proceedings of an international conference on Fracture Mechanics in Engineering Application ISBN: 9028607196 ISBN-13(EAN): 9789028607194 Издательство: Springer Рейтинг: Цена: 315850.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: "It is true that in recent times, science and tech- nology - and their practitioners - have been subjected to much public scrutiny, debate and severe criticism". On the other hand, the depletion of non-renewable resources, degradation of the natural environment and a host of other problems had been laid at the door of technology and science.
Автор: Tao Chin-wang Название: Mechanics And Materials Science - Proceedings Of The 2016 International Conference (Mms2016) ISBN: 9813228164 ISBN-13(EAN): 9789813228160 Издательство: World Scientific Publishing Цена: 427680.00 T Наличие на складе: Невозможна поставка. Описание: The 2016 International Conference on Mechanics and Materials Science (MMS2016) was held in Guangzhou, China on October 15-16, 2016.Aimed at providing an excellent international academic forum for all the researchers and practitioners, the conference attracted a wide spread participation among all over the universities and research institutes. MMS2016 features unique mixed topics of Mechatronics and Automation, Materials Science and Engineering, Materials Properties, Measuring Methods and Applications.This volume consists of 159 peer-reviewed articles by local and foreign eminent scholars, which cover the frontiers and hot topics in the relevant areas.
