CAE Design and Failure Analysis of Automotive Composites, Srikanth Pilla, Charles Lu

Автор: Segers Jorge
Название: Analysis Techniques for Racecar Data Acquisition
ISBN: 0768064597 ISBN-13(EAN): 9780768064599
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 121050.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Examines techniques for analyzing data recorded by any vehicle`s data acquisition system. It details how to measure the performance of the vehicle and driver, what can be learned from it, and how this information can be used to advantage next time the vehicle hits the track. Such information is invaluable to racing engineers and managers, race teams, and racing data analysts in all motorsports.

Автор: Xiaolin Tang, Yanjun Huang, Hong Wang, Yechen Qin
Название: Noise and Torsional Vibration Analysis of Hybrid Vehicles
ISBN: 168173477X ISBN-13(EAN): 9781681734774
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 76690.00 T
Наличие на складе: Невозможна поставка.
Описание: Thanks to the potential of reducing fuel consumption and emissions, hybrid electric vehicles (HEVs) have been attracting more and more attention from car manufacturers and researchers. Due to involving two energy sources, i.e., engine and battery, the powertrain in HEVs is a complicated electromechanical coupling system that generates noise and vibration different from that of a traditional vehicle. Accordingly, it is very important to explore the noise and vibration characteristics of HEVs. In this book, a hybrid vehicle with two motors is taken as an example, consisting of a compound planetary gear set (CPGS) as the power-split device, to analyze the noise and vibration characteristics. It is specifically intended for graduates and anyone with an interest in the electrification of full hybrid vehicles.The book begins with the research background and significance of the HEV. The second chapter presents the structural description and working principal of the target hybrid vehicle. Chapter 3 highlights the noise, vibration, and harshness (NVH) tests and corresponding analysis of the hybrid powertrain. Chapter 4 provides transmission system parameters and meshing stiffness calculation. Chapter 5 discusses the mathematical modeling and analyzes torsional vibration (TV) of HEVs. Finally, modeling of the hybrid powertrain with ADAMS is given in Chapter 6.

Автор: Xiaolin Tang, Yanjun Huang, Hong Wang, Yechen Qin
Название: Noise and Torsional Vibration Analysis of Hybrid Vehicles
ISBN: 1681734753 ISBN-13(EAN): 9781681734750
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 56370.00 T
Наличие на складе: Невозможна поставка.
Описание: Thanks to the potential of reducing fuel consumption and emissions, hybrid electric vehicles (HEVs) have been attracting more and more attention from car manufacturers and researchers. Due to involving two energy sources, i.e., engine and battery, the powertrain in HEVs is a complicated electromechanical coupling system that generates noise and vibration different from that of a traditional vehicle. Accordingly, it is very important to explore the noise and vibration characteristics of HEVs. In this book, a hybrid vehicle with two motors is taken as an example, consisting of a compound planetary gear set (CPGS) as the power-split device, to analyze the noise and vibration characteristics. It is specifically intended for graduates and anyone with an interest in the electrification of full hybrid vehicles.The book begins with the research background and significance of the HEV. The second chapter presents the structural description and working principal of the target hybrid vehicle. Chapter 3 highlights the noise, vibration, and harshness (NVH) tests and corresponding analysis of the hybrid powertrain. Chapter 4 provides transmission system parameters and meshing stiffness calculation. Chapter 5 discusses the mathematical modeling and analyzes torsional vibration (TV) of HEVs. Finally, modeling of the hybrid powertrain with ADAMS is given in Chapter 6.

Автор: Stoakes Graham
Название: Automotive Oscilloscopes: Waveform Analysis
ISBN: 0992949262 ISBN-13(EAN): 9780992949266
Издательство: Неизвестно
Рейтинг:
Цена: 50500.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.

Автор: Derrick Stoddard
Название: Automotive Black Boxes: Background, Issues, Engineering Data Analysis
ISBN: 1634630602 ISBN-13(EAN): 9781634630603
Издательство: Nova Science
Рейтинг:
Цена: 205910.00 T
Наличие на складе: Невозможна поставка.
Описание: So much of great literature centres on explorations of gender, sex, and sexuality. What does it mean to be a proper man or woman; what if one cannot be properly called either? Should one wield one`s sexual power politically? What is the relation between law, divine or secular, and sexuality? What does it mean to fail at doing gender? These are just some of the questions that this volume examines.

Автор: Walter, Eric Walter, Richard
Название: Data acquisition from hd vehicles using j1939 can bus
ISBN: 0768081726 ISBN-13(EAN): 9780768081725
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 99790.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Provides a unique road map for the data acquisition user. The authors give a clear and concise description of the CAN protocol plus a review of all 19 parts of the SAE International J1939 standard family. Pertinent standards are illuminated with tables, graphs and examples. Practical applications covered are calculating fuel economy, duty cycle analysis, and capturing intermittent faults.

Автор: Jaeseok Kim; Hyunchul Shin
Название: Algorithm & SoC Design for Automotive Vision Systems
ISBN: 9402401148 ISBN-13(EAN): 9789402401141
Издательство: Springer
Рейтинг:
Цена: 104480.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:

Preface.

Chapter 1 Introduction; Jae-seok Kim, Hyun-chul Shin. 1.1 Introduction to the advanced driver assistance system. 1.2 Industrial Developments for ADAS. 1.3 System-on-chip platform architecture for automobile vision systems. References.

Chapter 2 Lens Correction and Gamma Correction; Sang-Bock Cho. 2.1 Lens Correction. 2.2 Gamma Correction. References.

Chapter 3 Super Resolution; Hyo-Moon Cho. 3.1 Introduction. 3.2 Observation model. 3.3 Survey of the Super Resolution algorithms. 3.4 Novel Super Resolution registration algorithm based on Frequency. 3.5 Conclusion. References.

Chapter 4 Image enhancement for improving object recognition; Jae-Seok Kim. 4.1 General Image Enhancement Techniques. 4.2 Image Enhancement Techniques for Automobile Application. References.

Chapter 5 Detection of Vehicles and Pedestrians; Hyunchul Shin, Irfan Riaz. 5.1 Introduction to Vehicle/Pedestrian Detection. 5.2 Vehicle Detection. 5.3 Pedestrian Detection. 5.4 Night-time Pedestrian Detection. References.

Chapter 6 Monitoring Driver's State and Predicting Unsafe Driving Behavior; Hang-Bong Kang. 6.1 Introduction. 6.2 Driver Drowsiness Measurement. 6.3. Driver Distraction Detection. 6.4 Predicting Unsafe Driving Behavior. 6.5 Discussion. 6.6 Conclusions. References

Chapter 7 SoC Architecture for Automobile Vision System; Kyounghoon Kim, Kiyoung Choi. 7.1 Automotive Applications. 7.2 Architectural Consideration for Vision. 7.3 Example - Pedestrian Detection. 7.4 Comparison of COTS Architectures. 7.5 More on GPU. 7.6 Comparison of VLIW and COTS Architecture. 7.7 Memory/Bus Requirement. 7.8 Vision Processors. 7.9 Yet another Approach. 7.10 Conclusions. References.

Chapter 8 Hardware accelerator for feature point detection and Matching; Jun-Seok Park, Lee-Sup Kim. 8.1. Introduction to interest point detection and matching. 8.2. Interest point detection hardware with joint algorithm-architecture optimization. 8.3. Unified Datapath. 8.4. Chip implementation. 8.5. Application. 8.6. Conclusions. References.

Chapter 9 Software Development Environment for Automotive SoC; Jeonghun Cho. 9.1. Introduction. 9.2. AUTOSAR architecture. 9.3. Demonstration of AUTOSAR ECUs. 9.4. Conclusions. References.

Chapter 10 Reliability issues for automobile SoCs; Sungju Park. 10.1 Introduction. 10.2 Conclusions. References.

Автор: Srikanth Pilla, Charles Lu
Название: Design of Automotive Composites and CAE Design and Failure Analysis of Automotive Composites Set
ISBN: 0768081750 ISBN-13(EAN): 9780768081756
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 109030.00 T
Наличие на складе: Невозможна поставка.
Описание: This set consists of two books, Design of Automotive Composites and CAE Design and Failure Analysis of Automotive Composites, both developed by Dr. Charles Lu and Dr. Srikanth Pilla.

Автор: Ram P. Bajpai; U. Chandrasekhar; Avinash R. Aranka
Название: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering
ISBN: 8132218701 ISBN-13(EAN): 9788132218708
Издательство: Springer
Рейтинг:
Цена: 191560.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book presents the best articles presented by researchers, academicians and industrial experts in the International Conference on "Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering". The book discusses new concept designs, analysis and manufacturing technologies, where more swing is for improved performance through specific and/or multifunctional linguistic design aspects to downsize the system, improve weight to strength ratio, fuel efficiency, better operational capability at room and elevated temperatures, reduced wear and tear, NVH aspects while balancing the challenges of beyond Euro IV/Barat Stage IV emission norms, Greenhouse effects and recyclable materials. The innovative methods discussed in the book will serve as a reference material for educational and research organizations, as well as industry, to take up challenging projects of mutual interest.

Автор: Kurowski, Paul M.
Название: Finite element analysis for design engineers /
ISBN: 0768082315 ISBN-13(EAN): 9780768082319
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 106260.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Finite Element Analysis (FEA) has been widely implemented by the automotive industry as a productivity tool for design engineers to reduce both development time and cost. This essential work serves as a guide for FEA as a design tool and addresses the specific needs of design engineers to improve productivity.

Автор: CAERC, Tsinghua University
Название: Sustainable Automotive Energy System in China
ISBN: 3642368468 ISBN-13(EAN): 9783642368462
Издательство: Springer
Рейтинг:
Цена: 148020.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book identifies and addresses key issues of automotive energy in China. It covers demography, economics, technology and policy, providing a broad perspective to aid in the planning of sustainable road transport in China.

Автор: Bullen, George N.,
Название: Economics of composites /
ISBN: 0768081211 ISBN-13(EAN): 9780768081213
Издательство: Turpin
Рейтинг:
Цена: 165090.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Presents essential information that captures the state of the composites industry to assist engineering/technical professionals in charting a course for achieving economic success. The material characteristics of composites, their applications, and complex composites manufacturing processes depend on many factors. These are all fully considered and presented.