Fluid Mechanics and Thermodynamics of Turbomachinery, Prabhu Nirajan
Автор: Gurtin Название: The Mechanics and Thermodynamics of Continua ISBN: 1107617065 ISBN-13(EAN): 9781107617063 Издательство: Cambridge Academ Рейтинг: Цена: 79200.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: A consolidated treatment of continuum mechanics and thermodynamics that stresses the universal status of the basic balances and the entropy imbalance. The Mechanics and Thermodynamics of Continua is written for engineers, physicists and mathematicians.
Автор: Khvorostyanov Название: Thermodynamics, Kinetics, and Microphysics of Clouds ISBN: 1107016037 ISBN-13(EAN): 9781107016033 Издательство: Cambridge Academ Рейтинг: Цена: 101370.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Thermodynamics, Kinetics, and Microphysics of Clouds extends the subject of cloud microphysics with a unified theoretical foundation that is based on the general principles of thermodynamics and kinetics. It will be invaluable for researchers and advanced students engaged in cloud and aerosol physics, and air pollution and climate research.
Автор: Asli Название: Fluid Mechanics and Heat Transfer ISBN: 1771880848 ISBN-13(EAN): 9781771880848 Издательство: Taylor&Francis Рейтинг: Цена: 122490.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This valuable new book focuses on new methods and techniques in fluid mechanics and heat transfer in mechanical engineering. The book includes the research of the authors on the development of optimal mathematical models and also uses modern computer technology and mathematical methods for the analysis of nonlinear dynamic processes. It covers technologies applicable to both fluid mechanics and heat transfer problems, which include a combination of physical, mechanical, and thermal techniques. The authors develop a new method for the calculation of mathematical models by computer technology, using parametric modeling techniques and multiple analyses for mechanical system. The information in this book is intended to help reduce the risk of system damage or failure. Included are sidebar discussions, which contain information and facts about each subject area that help to emphasize important points to remember.
Автор: Tucker Название: Advanced Computational Fluid and Aerodynamics ISBN: 1107428831 ISBN-13(EAN): 9781107428836 Издательство: Cambridge Academ Рейтинг: Цена: 61250.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Advanced Computational Fluid and Aerodynamics outlines the computational fluid dynamics evolution and gives an overview of the plethora of methods available to the engineer. It is suitable for a wide range of audiences engaged in computational fluid dynamics, including advanced undergraduates, researchers and industrial practitioners.
Автор: Hans J. Rath; Christoph Egbers Название: Advances in Fluid Mechanics and Turbomachinery ISBN: 3642721591 ISBN-13(EAN): 9783642721595 Издательство: Springer Рейтинг: Цена: 95770.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This special volume contains several articles written in honour of Professor IngolfTeipel on the occasion of his 65th birthday. Professor Teipel was born on March 15th, 1933 in Wissen/Sieg. He started his school career in Betzdorf/Sieg. From 1943 to 1951 he went to the Gymnasium in Betzdorf, where he obtained his school-leaving exam after only 8 years. In 1951 Professor Teipel started his studies in Mechanical Engineering at the Technical University of Aachen and got his diploma at the Aerodynamic Institute in 1956. Then Professor Teipel decided to join the research group of the Institute of Theoretical Gasdynamics at the Deutsche Versuchsanstalt fiir Luft- und Raumfahrt (DVL), the famous institute of Professor Oswatitsch, where he spent about 13 years until 1968. At the Technical University of Aachen he finished his dissertation devoted to spherical-symmetric shock waves and he obtained his doctorate in Mechanical Engineering in 1960. Some years later he went as a guest scientist to the Aerospace Laboratories of Dayton, Ohio, USA. In 1965 Professor Teipel fmished his habilitation work with a paper on unsteady transonic pressure forces at the Technical University of Aachen, where he recieved the venia legendi in fluid mechanics. In this year, Professor Teipel was given the freedom of the state Tennessee, USA.
Автор: Schobeiri, Meinhard T. Название: Turbomachinery flow physics and dynamic performance ISBN: 3642061141 ISBN-13(EAN): 9783642061141 Издательство: Springer Рейтинг: Цена: 121070.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: The book provides senior undergraduate students, graduate students and engineers in the turbomachinery industry with a solid background of turbomachinery flow physics and performance fundamentals that are essential for understanding turbomachinery performance and flow complexes.
Автор: Subbiah Название: Rotor and Structural Dynamics of Turbomachinery ISBN: 3319732951 ISBN-13(EAN): 9783319732954 Издательство: Springer Рейтинг: Цена: 107130.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book provides engineers and scientists with practical fundamentals for turbomachinery design. It presents a detailed analysis of existing procedures for the analysis of rotor and structure dynamics, while keeping mathematical equations to a minimum. Specific terminologies are used for rotors and structures, respectively, allowing the readers to clearly distinguish between the two. Further, the book describes the essential concepts needed to understand rotor failure modes due to lateral and torsional oscillations. It guides the reader from simple single-degree-of-freedom models to the most complex multi-degree-of-freedom systems, and provides useful information concerning steel pedestal stiffness degradation and other structural issues. Fluid-film bearing types and their dynamical behavior are extensively covered and discussed in the context of various turbomachinery applications. The book also discusses shaft alignment and rotor balancing from a practical point of view, providing readers with essential information to help them solve practical problems. As the main body of the book focuses on the diagnostics and description of case studies addressing the most pressing practical issues, together with their successful solutions, it offers a valuable reference guide, helping field engineers manage day-to-day issues with turbomachinery.
Автор: Jinjun Wang, Lihao Feng Название: Flow Control Techniques and Applications ISBN: 1107161568 ISBN-13(EAN): 9781107161566 Издательство: Cambridge Academ Рейтинг: Цена: 92920.00 T Наличие на складе: Поставка под заказ. Описание: This is the first book to systematically describe different flow control techniques, with each chapter discussing a particular technique, its main characteristics, applications, and control mechanism. The history and development of flow control are also discussed, offering students, researchers and engineers a solid background in the topic.
Автор: Seppo A. Korpela Название: Principles of Turbomachinery ISBN: 1119518083 ISBN-13(EAN): 9781119518082 Издательство: Wiley Рейтинг: Цена: 123500.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание:
A newly updated and expanded edition that combines theory and applications of turbomachinery while covering several different types of turbomachinery
In mechanical engineering, turbomachinery describes machines that transfer energy between a rotor and a fluid, including turbines, compressors, and pumps. Aiming for a unified treatment of the subject matter, with consistent notation and concepts, this new edition of a highly popular book provides all new information on turbomachinery, and includes 50% more exercises than the previous edition. It allows readers to easily move from a study of the most successful textbooks on thermodynamics and fluid dynamics to the subject of turbomachinery. The book also builds concepts systematically as progress is made through each chapter so that the user can progress at their own pace.
Principles of Turbomachinery, 2nd Edition provides comprehensive coverage of everything readers need to know, including chapters on: thermodynamics, compressible flow, and principles of turbomachinery analysis. The book also looks at steam turbines, axial turbines, axial compressors, centrifugal compressors and pumps, radial inflow turbines, hydraulic turbines, hydraulic transmission of power, and wind turbines. New chapters on droplet laden flows of steam and oblique shocks help make this an incredibly current and well-rounded resource for students and practicing engineers.
Includes 50% more exercises than the previous edition
Uses MATLAB or GNU/OCTAVE for all the examples and exercises for which computer calculations are needed, including those for steam
Allows for a smooth transition from the study of thermodynamics, fluid dynamics, and heat transfer to the subject of turbomachinery for students and professionals
Organizes content so that more difficult material is left to the later sections of each chapter, allowing instructors to customize and tailor their courses for their students
Principles of Turbomachinery is an excellent book for students and professionals in mechanical, chemical, and aeronautical engineering.
Автор: Meinhard T. Schobeiri Название: Turbomachinery Flow Physics and Dynamic Performance ISBN: 3662517558 ISBN-13(EAN): 9783662517550 Издательство: Springer Рейтинг: Цена: 156720.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Rigorously updated and enhanced for this second edition, with fresh chapters on laminar turbulent transition, turbulence and boundary layer, this textbook is a solid source of information for designing state-of-the art turbomachinery components and systems.
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
