Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics – 2018, Gheorghe
Автор: Gheorghe I. Gheorghe Название: Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics - 2017 ISBN: 3319630903 ISBN-13(EAN): 9783319630908 Издательство: Springer Рейтинг: Цена: 149060.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This first edition of conference Proceedings reflects the expansion of the field of Mechatronics, which has now taken its place in the world of newer transdisciplinary fields of Adaptronics, Integronics, and Cyber-Mix Mechatronics. It presents state-of-the art advances in Mechatronics, Adaptronics, Integronics and Cyber-Mix-Mechatronics. The 1st International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME was organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest (Romania), on September 7th–8th, 2017 and attracted specialists from all over the world—including North America, South America, and Asia. In addition to presenting research results, ICOMECYME also offered a forum for exchange between R&D experts.
Автор: Gheorghe Ion Gheorghe Название: Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics – 2019 ISBN: 3030269906 ISBN-13(EAN): 9783030269906 Издательство: Springer Рейтинг: Цена: 139750.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: These proceedings gather contributions presented at the 3rd International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME, organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest, Romania, on September 5th-6th, 2019.
The 3rd Annual International Conference on Design, Manufacturing and Mechatronics (ICDMM2016) was successfully held in Wuhan, China in 2016.
The ICDMM2016 covers a wide range of fundamental studies, technical innovations and industrial applications in industry design, manufacturing and mechatronics. The ICDMM2016 program consists of 4 keynote speeches, 96 oral and poster presentations. We were pleased to have more than 80 participants from China, South Korea, Taiwan, Japan, Malaysia, and Saudi Arabia. However, finally, only 83 articles were selected after peer review to be included in this proceedings.
Автор: Baoyan Duan; Kazunori Umeda; Woonbong Hwang Название: Proceedings of the Seventh Asia International Symposium on Mechatronics ISBN: 9813294361 ISBN-13(EAN): 9789813294363 Издательство: Springer Рейтинг: Цена: 279500.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: It discusses the latest technological trends and advances in electromechanical coupling and environmental adaptability design for electronic equipment, sensing and measurement, mechatronics in manufacturing and automation, micro-mechatronics, energy harvesting & storage, robotics, automation and control systems.
Автор: Baoyan Duan; Kazunori Umeda; Woonbong Hwang Название: Proceedings of the Seventh Asia International Symposium on Mechatronics ISBN: 981329440X ISBN-13(EAN): 9789813294400 Издательство: Springer Рейтинг: Цена: 186330.00 T Наличие на складе: Нет в наличии. Описание: It discusses the latest technological trends and advances in electromechanical coupling and environmental adaptability design for electronic equipment, sensing and measurement, mechatronics in manufacturing and automation, micro-mechatronics, energy harvesting & storage, robotics, automation and control systems.
Автор: Dan Zhang; Bin Wei Название: Advanced Mechatronics and MEMS Devices II ISBN: 3319321781 ISBN-13(EAN): 9783319321783 Издательство: Springer Рейтинг: Цена: 204970.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book introduces the state-of-the-art technologies in mechatronics, robotics, and MEMS devices in order to improve their methodologies. It provides a follow-up to 'Advanced Mechatronics and MEMS Devices' (2013) with an exploration of the most up-to-date technologies and their applications, shown through examples that give readers insights and lessons learned from actual projects. Researchers on mechatronics, robotics, and MEMS as well as graduate students in mechanical engineering will find chapters on:
Fundamental design and working principles on MEMS accelerometersInnovative mobile technologiesForce/tactile sensors developmentControl schemes for reconfigurable robotic systemsInertial microfluidicsPiezoelectric force sensors and dynamic calibration techniques...And more. Authors explore applications in the areas of agriculture, biomedicine, advanced manufacturing, and space. Micro-assembly for current and future industries is also considered, as well as the design and development of micro and intelligent manufacturing.
Автор: Jan Awrejcewicz; Krzysztof J. Kali?ski; Roman Szew Название: Mechatronics: Ideas, Challenges, Solutions and Applications ISBN: 3319268856 ISBN-13(EAN): 9783319268859 Издательство: Springer Рейтинг: Цена: 130610.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Multi-criteria Robot Selection Problem for an Automated Single-sided Lapping System.- Mechatronic Design Towards Investigation of the Temporo-Mandibular Joint Behaviour.- Requirements for Tire Models of the Lightweight Wheeled Mobile Robots.- Simulations of Accelerations and Velocities of the Robot's Arm.- The Numerical Analysis of Burnishing Process of the Steel Tubes Hollow.- Piecewise Control Method of Oxygen Flow in PEM Fuel Cell.- Testing the Piezoelectric Energy Harvester's Deflection on the Amount of Generated Energy.- Analysis of Crash Computation on a Basis of the Principle of Linear Momentum and Kinetic Energy.- Modeling and Simulation of the Solar Collector Using Different Approaches.- Uncertainty Analysis of Innovative Method for Wheel Load Measurements.- Designing the 40 kHz Piezoelectric Sandwich Type Ultrasonic Transducer.- Development of an Electronic Stethoscope.- Determination of Forces and Moments of Force Transmitted by the Wheel of a Mobile Robot During Motion.- Comparative Study of Maintenance Vehicles Using Vibration Analysis.- Correction of the Influence of Not Ideal Geometric Profile on the Conductivity of Reference Cell.- Modelling and Analysis of the Hydraulic Servo Drive System.- Stereoscopic Technique for a Motion Parameters Determination of Remotely Operated Vehicles.
Автор: Sa?d Zeghloul; Med Amine Laribi; Jean-Pierre Gazea Название: Robotics and Mechatronics ISBN: 3319223674 ISBN-13(EAN): 9783319223674 Издательство: Springer Рейтинг: Цена: 177010.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание:
Part I: Mechanism and advanced mechanical design.- A study of structural stress analysis of reducers for supporting reliability design, by Yuo-Tern Tsai, Kuan-Hong Lin, Kuo-Shong Wang.- Structural and Dimensional Synthesis of Parallel Mechanism with Two End-Effectors, by Zh. Baigunchekov, M. Kalimoldaev, M. Utenov, B. Arymbekov, N. Baigunchekov.- Parametric Design Optimization of Two Link Robotic Manipulator, by F. Z. Baghli, L. El Bakkali, O. Hamdoun.- Investigation of the Behaviour of a new Miniature Carbon-Paraffin Phase-change Actuator, by P. Lazarou, C. Rotinat-Libersa.- Synthesis of driving mechanisms in robotics by combinatorial analysis method, by Peter Mitrouchev, Jingtao Chen, Frйdйric Maffray, Yaqing Zheng.- Part II: Humanoid and legged robotics.- Design and experiments on a new humanoid robot: TIDOM, by A. Eon, P. Seguin, M. Arsicault, S. Zeghloul.- Experimental Inspiration and Rapid Prototyping of a novel Humanoid Torso, by D. Cafolla, M. Ceccarelli.- Design of Robots Used As Education Companion and Tutor, by Albert Causo, Giang Truong Vo, I-Ming Chen, Song Huat Yeo.- Walking of a biped robot balanced with a reciprocating torso, by Victor De-Lйon-Gomez, J. Alfonso Pamanes, Victor Santibanez.- Part III: Parallel manipulators.- Determining the reachable workspace for 6-DOF Delta manipulators, by C. K. Huang, K. Y. Tsai.- A reconfiguration strategy of a parallel Delta-type robot to improve the kinematic performance, by A. L. Balmaceda-Santamaria, E. Castillo-Castaneda.- Workspace and Singularity analysis of a Delta like family robot, by R. Jha, D. Chablat, F. Rouillier, G. Moroz.- Optimal trajectory Planning of 3RRR Parallel Robot using ant colony algorithm, by O. Hamdoun, L. El Bakkali, F. Z. Baghli.- Part IV: Medical robotics I.- Force control implementation of a haptic device for medical use, by H. Saafi, M.A. Laribi, S. Zeghloul.- Integration of Automated Camera Steering for Robotic Single-Site Surgery, by Mohsen Zahiri, Carl A. Nelson, R. Gonzalo Garay-Romero, Dmitry Oleynikov.- Kinematic models of a new spherical parallel manipulator used as a master device, by H. Saafi, M.A. Laribi, M. Arsicault, S. Zeghloul.- Part V: Medical robotics II: Mechatronic device to assist therapies during hand fingers rehabilitation, by F. Aguilar-Pereyra, E. Castillo-Castaneda.- Mechanical Design of a Craniotomy Robotic Manipulator Based on Optimal Kinematic and Force Performance, by T. Essomba, C.-T. Wu, S.-T. Lee, C.-H. Kuo.- Dynamic Simulation of a Cable-Based Gait Training Machine, by H. Lamine, S. Bennour, L. Romdhane.- An in vivo experiment to assess the validity of the Log Linearized Hunt-Crossley model for contacts of robots with the human abdomen, by F. Courrиges, M. A. Laribi, M. Arsicault, S. Zeghloul.- Part VI: Control and vision; Real-time Reconstruction of Heightmaps from Images taken with a UAV, by Jose Gabriel Ramirez-Torres, Ander Larranaga-Cepeda.- A Human-Machine Interface with Unmanned Aerial Vehicles, by D. Soto-Gerrero, J.-G. Ramrez-Torres.- Design and Simulation of Robot Manipulator Position Control System based on Adaptive Fuzzy PID Controller, by F. Z. Baghli, L. El Bakkali.- Generating the optimum dynamic trajectory of a hybrid cable-serial robot, by M. Ismail, S. Lahouar, L. Romdhane.- An Integrated Software Package for Advanced Industrial Robot Application, by C. Liang, H. Yan, R. Li, I.-M. Chen, M.H. Ang Jr., Z. Huang.- Part VII: Advanced Robotics.- A method for the approximation of the multiple IK solutions of regular manipulators based on the uniqueness domains and using MLP, by Vassilis C. Moulianitis, Evgenios M. Kokkinopoulos, Nikos A. Aspragathos.- An Approach to Symbolical Formulation of Forward Kinematics of Serial Robots, by S. Krutikov.- Grasps Database Generator for Anthropomorphic Robotic Hands, by H. Mnyusiwalla, P. Vulliez, J.P. Gazeau, S. Zeghloul.- From human motion capture to industrial robot imitation, by P. Laguillaumie, M. A. Laribi, P. Seguin, P. Vulliez, A. De
Автор: John Billingsley; Peter Brett Название: Machine Vision and Mechatronics in Practice ISBN: 3662519224 ISBN-13(EAN): 9783662519226 Издательство: Springer Рейтинг: Цена: 113180.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: The contributions for this book have been gathered over several years from conferences held in the series of Mechatronics and Machine Vision in Practice, the latest of which was held in Ankara, Turkey.
Автор: Xinghuo Yu; Mehmet ?nder Efe Название: Recent Advances in Sliding Modes: From Control to Intelligent Mechatronics ISBN: 3319362232 ISBN-13(EAN): 9783319362236 Издательство: Springer Рейтинг: Цена: 121890.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This volume is dedicated to Professor Okyay Kaynak to commemorate his life time impactful research and scholarly achievements and outstanding services to profession.
Автор: Tomas Brezina; Ryszard Jablonski Название: Recent Advances in Mechatronics ISBN: 364242497X ISBN-13(EAN): 9783642424977 Издательство: Springer Рейтинг: Цена: 204040.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: The main goal of the mechatronical approach to design of complex products is to achieve a new quality of their utility value at a reasonable price. This text, based on the 8th International Symposium on Mechatronics, reviews the state-of-the-art in the field.
Автор: Jan Awrejcewicz; Roman Szewczyk; Maciej Trojnacki; Название: Mechatronics: Ideas for Industrial Applications ISBN: 3319109898 ISBN-13(EAN): 9783319109893 Издательство: Springer Рейтинг: Цена: 186330.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Control and Automation.- Robotics.- Measuring Techniques and Systems.
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
