Discrete Event Modeling and Simulation Technologies, Hessam S. Sarjoughian; Francois E. Cellier

Автор: Mohammad S. Obaidat; Tuncer ?ren; Janusz Kacprzyk;
Название: Simulation and Modeling Methodologies, Technologies and Applications
ISBN: 3319264699 ISBN-13(EAN): 9783319264691
Издательство: Springer
Рейтинг:
Цена: 130430.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Thepresent book includes a set of selected extended papers from the 4thInternational Conference on Simulation and Modeling Methodologies, Technologiesand Applications (SIMULTECH 2014), held in Vienna, Austria, from 28 to 30 August2014.

Автор: Gibson, Ian.
Название: Additive manufacturing technologies
ISBN: 1493921126 ISBN-13(EAN): 9781493921126
Издательство: Springer
Рейтинг:
Цена: 0.00 T
Наличие на складе: Невозможна поставка.
Описание: Additive Manufacturing Technologies

Автор: Hessam S. Sarjoughian; Francois E. Cellier
Название: Discrete Event Modeling and Simulation Technologies
ISBN: 0387950656 ISBN-13(EAN): 9780387950655
Издательство: Springer
Рейтинг:
Цена: 93160.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The computing world has witnessed during the 1990s advances in areas such as mobile and enterprise computing. The common underlying basis enabling the realization of various facets of these dinds of computing is modeling, simulation, and artificial intelligence. This book provides a forum for developing postmodern AI-based modeling and simulation.

Автор: Peter Fritzson
Название: Principles of Object-Oriented Modeling and Simulation with Modelica 3.3: A Cyber-Physical Approach
ISBN: 111885912X ISBN-13(EAN): 9781118859124
Издательство: Wiley
Рейтинг:
Цена: 120330.00 T
Наличие на складе: Невозможна поставка.
Описание: Fritzson covers the Modelica language in impressive depth from the basic concepts such as cyber-physical, equation-base, object-oriented, system, model, and simulation, while also incorporating over a hundred exercises and their solutions for a tutorial, easy-to-read experience. * The only book with complete Modelica 3.

Автор: Theodore T. Allen
Название: Introduction to Discrete Event Simulation and Agent-based Modeling
ISBN: 1447157257 ISBN-13(EAN): 9781447157250
Издательство: Springer
Рейтинг:
Цена: 60940.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book shows how simulation can facilitate improvements on the job and in communities. The reader will learn to plan a project and communicate using a charter, how to establish simultaneous intervals on key responses and apply selection and ranking, and more.

Автор: Mohammad S. Obaidat; Tuncer ?ren; Yuri Merkuryev
Название: Simulation and Modeling Methodologies, Technologies and Applications
ISBN: 3319698311 ISBN-13(EAN): 9783319698311
Издательство: Springer
Рейтинг:
Цена: 186330.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This Proceedings book reports on new and innovative solutions regarding methodologies and applications of modeling and simulation. It includes a set of selected, extended papers from the 6th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2016), held in Lisbon, Portugal, from 29 to 31 July, 2016. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. SIMULTECH 2016 received 76 submissions from 35 countries and all continents. After a double-blind paper review performed by the Program Committee, 18% were accepted as full papers and thus selected for oral presentations. Additional papers were accepted as short papers and posters.
A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers from SIMULTECH 2016.

Автор: Mohammad S. Obaidat; Joaquim Filipe; Janusz Kacprz
Название: Simulation and Modeling Methodologies, Technologies and Applications
ISBN: 3319035800 ISBN-13(EAN): 9783319035802
Издательство: Springer
Рейтинг:
Цена: 111790.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book includes extended and revised versions of a set of selected papers from the 2012 International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2012) which was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and held in Rome, Italy.

Автор: Mohammad S. Obaidat; Slawomir Koziel; Janusz Kacpr
Название: Simulation and Modeling Methodologies, Technologies and Applications
ISBN: 3319114565 ISBN-13(EAN): 9783319114569
Издательство: Springer
Рейтинг:
Цена: 139310.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Context-Aware Decision Support in Dynamic Environments: Theoretical & Technological Foundations.- Creating Hybrid Simulation Systems using a Flexible Meta Data Approach.- Simulation of Real-time Multiprocessor Scheduling using DES.- Epidemics and their Implications in Urban Environments: A Case Study on a National Scope.- Hybrid Multilinear Modeling and Applications.- Modeling Interdependent Socio-technical Networks: The Smart Grid - An Agent-based Modeling Approach.- A Heuristic Bidding Price Decision Algorithm based on Cost Estimation Accuracy under Limited Engineering Man-hours in EPC Projects.- Intelligent Agents for Human Behavior Modeling as Support to Operations.- Alternative to Multifractal Analysis of Scalable Intermittent Variables Applied to Measured and Estimated Soil Properties at an Arizona Field Site.- Adaptive Neuro Fuzzy Inference System used to Build Models with Uncertain Data: Study Case for Rainfed Maize in the State of Puebla (Mexico).- Separation of Carbon Dioxide from Synthesis Gas Containing Steam by Pressure Swing Adsorption at Mid-high Temperature.- Fuzzy Climate Scenarios for Temperature Indicate that Things could be Worse than Previously Thought.- Efficient Design of Inline E-Plane Waveguide Extracted Pole Filters through Enhanced Equivalent Circuits and Space Mapping.- Decomposition and Space Mapping for Reduced-cost Modeling of Waveguide Filters.- Quasi-Monte Carlo and RBF Metamodeling for Quantile Estimation in River Bed Morphodynamics.- Multi-objective Optimization by using Modified PSO Algorithm for Axial Flow Pump Impeller.- Emergency Department.

Автор: Nuno Pina; Janusz Kacprzyk; Joaquim Filipe
Название: Simulation and Modeling Methodologies, Technologies and Applications
ISBN: 364234335X ISBN-13(EAN): 9783642343353
Издательство: Springer
Рейтинг:
Цена: 113190.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book contains papers from the First International Conference on Simulation and Modeling Methodologies, Technologies and Applications, SIMULTECH 2011, held in Noordwijkerhout, The Netherlands.

Автор: Mohammad S. Obaidat; Janusz Kacprzyk; Tuncer ?ren;
Название: Simulation and Modeling Methodologies, Technologies and Applications
ISBN: 3319312944 ISBN-13(EAN): 9783319312941
Издательство: Springer
Рейтинг:
Цена: 139310.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Thepresent book includes a set of selected extended papers from the 5thInternational Conference on Simulation and Modeling Methodologies, Technologiesand Applications (SIMULTECH 2015), held in Colmar, France, from 21 to 23 July2015.

Автор: Tarek I. Zohdi
Название: Modeling and Simulation of Functionalized Materials for Additive Manufacturing and 3D Printing: Continuous and Discrete Media
ISBN: 3319700774 ISBN-13(EAN): 9783319700779
Издательство: Springer
Рейтинг:
Цена: 149060.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Within the last decade, several industrialized countries have stressed the importance of advanced manufacturing to their economies. Many of these plans have highlighted the development of additive manufacturing techniques, such as 3D printing which, as of 2018, are still in their infancy. The objective is to develop superior products, produced at lower overall operational costs. For these goals to be realized, a deep understanding of the essential ingredients comprising the materials involved in additive manufacturing is needed. The combination of rigorous material modeling theories, coupled with the dramatic increase of computational power can potentially play a significant role in the analysis, control, and design of many emerging additive manufacturing processes. Specialized materials and the precise design of their properties are key factors in the processes. Specifically, particle-functionalized materials play a central role in this field, in three main regimes:  (1) to enhance overall filament-based material properties, by embedding particles within a binder, which is then passed through a heating element and the deposited onto a surface,  (2) to “functionalize” inks by adding particles to freely flowing solvents forming a mixture, which is then deposited onto a surface and  (3) to directly deposit particles, as dry powders, onto surfaces and then to heat them with a laser, e-beam or other external source, in order to fuse them into place. The goal of these processes is primarily to build surface structures which are extremely difficult to construct using classical manufacturing methods. The objective of this monograph is introduce the readers to basic techniques which can allow them to rapidly develop and analyze particulate-based materials needed in such additive manufacturing processes. This monograph is broken into two main parts: “Continuum Method” (CM) approaches and “Discrete Element Method” (DEM) approaches. The materials associated with methods (1) and (2) are closely related types of continua (particles embedded in a continuous binder) and are treated using continuum approaches. The materials in method (3), which are of a discrete particulate character, are analyzed using discrete element methods.

Автор: Jerzy Tyszer
Название: Object-Oriented Computer Simulation of Discrete-Event Systems
ISBN: 0792385063 ISBN-13(EAN): 9780792385066
Издательство: Springer
Рейтинг:
Цена: 222670.00 T
Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Offers a presentation of a repertoire of computer simulation techniques available to the modelers of dynamic systems. This book includes a description of various essential issues relevant to computer simulation of discrete event systems, and it teaches simulation users how to design, program and exploit their own computer simulation models.