Автор: Michael D. Kotsovos Название: Finite-Element Modelling of Structural Concrete ISBN: 1498712304 ISBN-13(EAN): 9781498712309 Издательство: Taylor&Francis Рейтинг: Цена: 209270.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание:
A Powerful Tool for the Analysis and Design of Complex Structural Elements
Finite-Element Modelling of Structural Concrete: Short-Term Static and Dynamic Loading Conditions presents a finite-element model of structural concrete under short-term loading, covering the whole range of short-term loading conditions, from static (monotonic and cyclic) to dynamic (seismic and impact) cases. Experimental data on the behavior of concrete at both the material and structural levels reveal the unavoidable development of triaxial stress conditions prior to failure which dictate the collapse and ductility of structural concrete members. Moreover, and in contrast with generally accepted tenets, it can be shown that the post-peak behavior of concrete as a material is realistically described by a complete and immediate loss of load-carrying capacity. Hence rational analysis and design of concrete components in accordance with the currently prevailing limit-state philosophy requires the use of triaxial material data consistent with the notion of a fully brittle material, and this approach is implemented in the book by outlining a finite-element method for the prediction of the strength, deformation, and cracking patterns of arbitrary structural concrete forms.
Presents a Unified Approach to Structural Modeling
Numerous examples are given that show both the unifying generality of this proposed approach and the reliability of the ensuing numerical procedure for which the sole input is the specified uniaxial cylinder compressive strength of concrete and the yield stress of the steel. This not only offers a better understanding of the phenomenology of structural concrete behavior but also illustrates, by means of suitable examples, the type of revision required for improving design methods in terms of both safety and economy.
This book:
Highlights the significance of valid experimental information on the behavior of concrete under triaxial stress conditions for interpreting structural behavior
Describes the techniques used for obtaining valid test data and modeling concrete behavior
Discusses the modeling of steel properties as well as the interaction between concrete and steel
Presents numerical techniques for incorporating the material models into nonlinear finite-element analysis for the case of short-term static loading
Provides numerical techniques adopted for extending the use of the numerical analysis scheme for the solution of dynamic problems
Predicts the response of a wide range of structural-concrete configurations to seismic and impact excitations
Using relevant case studies throughout, Finite-Element Modelling of Structural Concrete: Short-Term Static and Dynamic Loading Conditions focuses on the realistic modeling of structural concrete on the basis of existing and reliable material data and aids in the research and study of structural concrete and concrete materials.
Автор: Holmes, John D. Название: Wind Loading of Structures ISBN: 0367273268 ISBN-13(EAN): 9780367273262 Издательство: Taylor&Francis Рейтинг: Цена: 153120.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This authoritative source for practising and academic sturctural engineers and graduate students ties the principles of wind loads on structures to meteorology, bluff-body aerodynamics, probability and statistics, and structural dynamics. It provides a broad view of codes and standards with information on global wind climates.
Автор: Hetherington, John , Smith, Peter Название: Blast and Ballistic Loading of Structures ISBN: 0367866870 ISBN-13(EAN): 9780367866877 Издательство: Taylor&Francis Рейтинг: Цена: 64300.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book brings together, in a concise format, the key elements of the loads produced from explosive sources, and how they interact with structures. Explosive sources include gas, high explosives, dust and nuclear materials. It presents quantitative information and design methods in a useable form without recourse to extensive mathematical
Автор: Bulson, P.S. Название: Explosive Loading of Engineering Structures ISBN: 036786634X ISBN-13(EAN): 9780367866341 Издательство: Taylor&Francis Рейтинг: Цена: 67360.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This book reviews the development of research into the explosive loading of structures, mainly since the beginning of the twentieth century. Major contributions in the fields of measurement, analysis and prediction are discussed.
Автор: Holmes, John D. Bekele, Seifu A. Название: Wind loading of structures ISBN: 0367620693 ISBN-13(EAN): 9780367620691 Издательство: Taylor&Francis Рейтинг: Цена: 73490.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Wind forces from extreme wind events are the dominant loading for many parts of the world, exacerbated by climate change and the continued construction of tall buildings and structures. This authoritative source, for practising and academic structural engineers and graduate students, ties the principles of wind loads on structures to the relevant aspects of meteorology, bluff-body aerodynamics, probability and statistics, and structural dynamics.This new edition covers: Climate change effects on extreme winds – particularly those from tropical cyclones, hurricanes and typhoons Modelling of potential wind vulnerability and damage Developments in extreme value probability analysis of extreme wind speeds and directions Explanation of the difference between ‘return period’ and ‘average recurrence interval’, as well as ‘bootstrapping’ techniques for deriving confidence limits Wind over water, and profiles and turbulence in non-synoptic windsAn expanded chapter on internal pressures produced by wind for various opening and permeability scenariosAerodynamic shaping of high- and low-rise buildings Recent developments in five major wind codes and standardsA new chapter on computational fluid dynamics (CFD), as applied to wind engineering A greatly expanded appendix providing the basic information on extreme wind climates for over 140 countries and territoriesAdditional examples for many chapters in this book
Автор: Kappos, Andreas Название: Dynamic Loading and Design of Structures ISBN: 0367396696 ISBN-13(EAN): 9780367396695 Издательство: Taylor&Francis Рейтинг: Цена: 67360.00 T Наличие на складе: Нет в наличии. Описание: This is the first book to examine the different types of loading in a comprehensive and systematic manner,and look at their significance in the design process.
Название: Abnormal loading on structures ISBN: 0367865408 ISBN-13(EAN): 9780367865405 Издательство: Taylor&Francis Рейтинг: Цена: 67360.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: This report contains a series of papers on the analysis of structures through full scale and numerical modelling, including the crucial areas of hazard identification and risk assessment of structures. This book will be essential reading for civil and structural engineers, designers and researchers.
Автор: Kotsovos Название: Finite-Element Modelling of Structural Concrete ISBN: 1138749265 ISBN-13(EAN): 9781138749269 Издательство: Taylor&Francis Рейтинг: Цена: 83690.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: A Powerful Tool for the Analysis and Design of Complex Structural Elements Finite-Element Modelling of Structural Concrete: Short-Term Static and Dynamic Loading Conditions presents a finite-element model of structural concrete under short-term loading, covering the whole range of short-term loading conditions, from static (monotonic and cyclic) to dynamic (seismic and impact) cases. Experimental data on the behavior of concrete at both the material and structural levels reveal the unavoidable development of triaxial stress conditions prior to failure which dictate the collapse and ductility of structural concrete members. Moreover, and in contrast with generally accepted tenets, it can be shown that the post-peak behavior of concrete as a material is realistically described by a complete and immediate loss of load-carrying capacity. Hence rational analysis and design of concrete components in accordance with the currently prevailing limit-state philosophy requires the use of triaxial material data consistent with the notion of a fully brittle material, and this approach is implemented in the book by outlining a finite-element method for the prediction of the strength, deformation, and cracking patterns of arbitrary structural concrete forms. Presents a Unified Approach to Structural Modeling Numerous examples are given that show both the unifying generality of this proposed approach and the reliability of the ensuing numerical procedure for which the sole input is the specified uniaxial cylinder compressive strength of concrete and the yield stress of the steel. This not only offers a better understanding of the phenomenology of structural concrete behavior but also illustrates, by means of suitable examples, the type of revision required for improving design methods in terms of both safety and economy. This book: Highlights the significance of valid experimental information on the behavior of concrete under triaxial stress conditions for interpreting structural behavior Describes the techniques used for obtaining valid test data and modeling concrete behavior Discusses the modeling of steel properties as well as the interaction between concrete and steel Presents numerical techniques for incorporating the material models into nonlinear finite-element analysis for the case of short-term static loading Provides numerical techniques adopted for extending the use of the numerical analysis scheme for the solution of dynamic problems Predicts the response of a wide range of structural-concrete configurations to seismic and impact excitations Using relevant case studies throughout, Finite-Element Modelling of Structural Concrete: Short-Term Static and Dynamic Loading Conditions focuses on the realistic modeling of structural concrete on the basis of existing and reliable material data and aids in the research and study of structural concrete and concrete materials.
Автор: Christian Meyer Название: Modelling and Analysis of Reinforced Concrete Structures for Dynamic Loading ISBN: 3211829199 ISBN-13(EAN): 9783211829196 Издательство: Springer Рейтинг: Цена: 97820.00 T Наличие на складе: Есть у поставщика Поставка под заказ. Описание: Offers a comprehensive review of the material behavior of concrete under dynamic loads, especially impact and impulse. This work discusses important design-related topics, with emphasis on performance of concrete frames subjected to seismic loads. It recognizes the significance of modern software systems by including examples.
Автор: John D. Holmes Название: Wind Loading of Structures, Third Edition ISBN: 1482229196 ISBN-13(EAN): 9781482229196 Издательство: Taylor&Francis Рейтинг: Цена: 168430.00 T Наличие на складе: Нет в наличии. Описание: A Definitive Up-to-Date Reference Wind forces from various types of extreme wind events continue to generate ever-increasing damage to buildings and other structures. Wind Loading of Structures, Third Edition fills an important gap as an information source for practicing and academic engineers alike, explaining the principles of wind loads on structures, including the relevant aspects of meteorology, bluff-body aerodynamics, probability and statistics, and structural dynamics. Written in Line with International Standards Among the unique features of the book are its broad view of the major international codes and standards, and information on the extreme wind climates of a large number of countries of the world. It is directed towards practicing (particularly structural) engineers, and academics and graduate students. The main changes from the earlier editions are: Discussion of potential global warming effects on extreme events More discussion of tornados and tornado-generated damage A rational approach to gust durations for structural design Expanded considerations of wind-induced fatigue damage Consideration of aeolian vibrations of suspended transmission lines Expansion of the sections on the cross-wind response of tall slender structures Simplified approaches to wind loads on "porous" industrial, mining, and oil/gas structures A more general discussion of formats in wind codes and standards Not dedicated to a specific code or standard, Wind Loading of Structures, Third Edition highlights the general format and procedures related to all major codes and standards, addresses structures of various types, and presents you with topics not typically covered in traditional texts such as internal pressures, fatigue damage by wind forces, and equivalent static wind load distributions.
Автор: Virdi, K. S. Название: Abnormal Loading on Structures ISBN: 0419259600 ISBN-13(EAN): 9780419259602 Издательство: Taylor&Francis Рейтинг: Цена: 275610.00 T Наличие на складе: Есть у поставщика Поставка под заказ.
Автор: Reese, Lymon C. Название: Single Piles and Pile Groups Under Lateral Loading ISBN: 0415469880 ISBN-13(EAN): 9780415469883 Издательство: Taylor&Francis Рейтинг: Цена: 127600.00 T Наличие на складе: Нет в наличии.
Казахстан, 010000 г. Астана, проспект Туран 43/5, НП2 (офис 2) ТОО "Логобук" Тел:+7 707 857-29-98 ,+7(7172) 65-23-70 www.logobook.kz
